Fresa CNC de 5 eixos, Bio-Impressão 3D contra o covid(!), Scanning 3D LIDAR em Apps, Balestra de berlindes, e plantar àrvores a partir de galhos!

Uma muito boa ideia, com Instrucções.

Para fazerem uma Fresa CNC de 5 eixos!

É bom.

DIY Desktop 5-axis CNC Mill

i_nerantzis

OK, you bought your router and you are happy with it. If you are an artist. 

But... if you are an engineer... you probably are not so happy.

You cut some 2D stuff. Then try some 2.5D and start getting excited. And then, there comes a day when you start wondering... What if I can make something more out of my 3-axis router?

Then it comes to your mind that you can always convert one of the axis from linear to rotary! Yes this is it! You start doing it... you succeed, but deep down inside you know it.

You have to go all the way to the end and do it properly. You need to make the conversion to a full 5-axis machine to be satisfied! If you feel like it, then follow my lead...

https://www.instructables.com/id/DIY-Desktop-5-axis-CNC-Mill/

Não serve só para testar tratamentos para o covid, serve para sei lá que outros testes e tratamentos...

An Unexpected Bioprinting Advantage Over COVID-19

Kerry Stevenson

Researchers have been using bioprinting technology to assist in the development of COVID-19 treatments.

According to a report in the New York Times, researchers at the Wake Forest Institute for Regenerative Medicine unexpectedly discovered a new approach: 3D bioprinted miniature organs. These human-like replications mimic much of the actual body functions, and thus are ideal for use in testing.

The miniature organs, which apparently include lung and colon analogs, offer a trouble-free testing platform that doesn’t risk any human or animal well-being. In addition, these miniature organs are far more closely related, biologically, than mammals that have previously been used for testing.

There’s another advantage in that these bioprinted organ analogs can be continually monitored, unlike, say the lungs inside of a test subject, which are a bit hard to access. In this way those performing tests can directly observe the effects of their prototype treatments.

https://www.fabbaloo.com/blog/2020/8/4/an-unexpected-bioprinting-advantage-over-covid-19

A tecnologia LIDAR em Apps vai-os permitir scans com muito mais fidelidade:

First LIDAR 3D Scanning Apps Appearing

Kerry Stevenson

There’s now at least one new app that takes advantage of Apple’s new LIDAR capability.

A few months ago Apple unexpectedly announced a new iPad Pro model equipped with LIDAR. LIDAR is a range-sensing technology that is often used in high-end equipment for 3D scanning, particularly for landscapes. Seeing it appear in an affordable consumer tablet was quite a shock.

Apple’s intention was to provide additional sensor information to aid their Augmented Reality operations. In other words, when you’re pasting that virtual IKEA couch in your living room view, the couch is positioned more accurately.

However, the presence of a new 3D scanning sensor in an iPad obviously hints that someone would, sooner or later, develop a specialized 3D scanning app to make good use of it.

That now seems to have happened, with startup SiteScape now beta-testing just such an app

https://www.fabbaloo.com/blog/2020/8/2/first-lidar-3d-scanning-apps-appearing

Há-que admirar o rapaz, isto é uma bela duma Engenhoca, para atirar berlindes, um Brinquedo feito para o tiro-ao-alvo de Escritório, ou Oficina...

Toy Crossbow

NobodyNothing13 

I started designing this crossbow in Tinkercad a while back, and it came out pretty well. After I finished, the design just sat untouched. Recently, I have looked back at my old design, noticing it still had many issues, like the fact that you had to use hot glue to assemble it, the striker was very short, nothing held the marble in place, it wasn't very powerful, and so on. So, I started refining this design, and fixed a lot of problems and made this crossbow easier to use, easier to assemble, more powerful and more accurate.

I made this toy crossbow to be a toy, and also part of a game. You can just launch marbles around for fun, but you can also play a game with these, with as many players as you want. In the game, you have a crossbow, some marbles, and 5 targets (I used plastic army guys). Then, you take turns shooting at your opponent's targets. You launch a marble, they launch a marble, and so on. I usually draw boundaries of how close your crossbow can get to your opponent's targets. You are eliminated if all 5 of your targets fall, and the last person who still has standing targets wins!

In the rest of this instructable, I will tell you how to print, assemble, and use this crossbow.

https://www.instructables.com/id/Toy-Crossbow/

Podem assim ter as vossas àrvores, a partir de galhos?

Uma grande ajuda aos Jardineiros, amadores ou profissionais...

Grow Trees From Twigs On Your Homestead 

Homesteading

Want to grow trees from twigs on your homestead? Use this method to save money and time as you watch your trees thrive and grow!

https://i.pinimg.com/564x/a5/47/9c/a5479c712a2e384ff6c16222b4687c95.jpg

Smart GPU, Olé, México!!! E salvar vidas, uma Mota a Foguete, um Ar Puro a sério, e as Instrucções da Ray Gun, em Vídeo...

Isto é fenomenal!

O Smart GPU, desta Empresa fantástica do México, promete dar asas aos vossos peojectos com o Arduino, no campo da Interface Gráfica, neste Exemplo, têem uma série de Apps, como se estivessem a mexer num Ipad!

Ora, para quem estiver a desenvolver Hardware dedicado, isto vai dar um aspecto brutalmente Profissional às vossas Criações: 

http://vizictechnologies.com/

A Plataforma mbed poderá ter grandes aplicações, com o Smart GPU, talvez mesmo, um Smartphone feito em casa...
Eis, do Blog do Designspark, a descrição da mbed:

Exploring mbed with the Application Board

Andrew Back 

A first look at the mbed platform and the recently launched Application Board.

I'm embarrassed to admit that the mbed platform has remained on my must-properly-investigate list for quite a long time. In fact, from since just before mbed's Chris Styles presented at an OSHUG meeting back in September 2010, and for whatever reason — most likely a pre-occupation with numerous other things of a technical nature — I haven't get round to taking a closer look until now.

What follows is by no means a thorough exploration of all the features that the mbed platform provides — that would require a much longer post — but rather instead a look at the out-of-box experience with an mbed module and the brand new Application Board.

It's safe to say that this won't be the last post on the topic!

http://www.designspark.com/blog/exploring-mbed-with-the-application-board

Eis um uso impressionante da Plataforma mbed, esta Câmara Digital Servo-Controlada:

 

The ServoCam is a web-enabled, servo controlled, digital camera. The miniature servos allow the camera to pan and tilt. The camera itself includes JPEG image compression and a UART interface. The hardware and example software developed for this project provides a platform which can be easily further refined into any number of applications.

Available here (camera not included): http://trobotown.com/index_files/pantilt.htm

Completamente diferente, mas uma Invenção simplesmente louvável, esta, permite salvar Vidas de Bébés!

Detecta a Paragem espiratória, nas crianças de tenra idade, o que permite intervir, mal seja necessário:

New Invention Could Help Reduce Sudden Infant Death Syndrome

Sarah Terzo

Sudden infant death syndrome, also known as crib death, is responsible for the deaths of 7000 infants a year. Now a new invention has been made that might drastically reduce this number.

Researchers at The Fraunhofer Institute for Reliability and Microintegration IZM in Berlin have developed a circuit board made of polyurethane which can be put inside baby’s clothes and monitor the breathing of the infant.  If the child stops breathing, the device alerts parents, who can then render first aid and save the baby before it is too late.

http://www.lifenews.com/2013/02/03/new-invention-could-help-reduce-sudden-infant-death-syndrome/

E quando os Anjinhos crescerem, poderão arrepiar os cabelos aos Pais, a andar nesta Mota a Foguete,  andando à módica velocidade de 600 Kilómetros/hora, Ohhh, Yeah!

State-of-the-art rocket-powered motorcycle sells on eBay

Brian Dodson

A state-of-the-art rocket-powered motorcycle that was recently advertised for sale on eBay has been sold to Gerd Habermann Racing. Engineered to hit speeds in excess of 400 mph (640 km/h) during the quarter-mile, the bike was designed and built by Glenn Brittian, one of the few drivers licensed by the National Hot Rod Association to drive a rocket dragster. The asking price was US$27,000, but the actual selling price has not been made public.

http://www.gizmag.com/rocket-motorcycle-brittain-ebay-sale/26017/

 

E voltando às Ciências da Vida, eis uma máquina que vai tornar a vida bem mais suportável aos que sofem de várias Doenças do Foro Respiratório, desde Alergias graves, às Doenças que causam Imunidade reduzida, o que não é obra pequena!

Poeiras, Pólens, Bácterias, Vírus, esta Máquina detecta e mata tudo, mesmo partículas que escapam aos Purificadores actuais.

Os Engenhocas estão de parabéns!

X-ray device traps airborne pathogens and neutralizes them

Ben Coxworth

Help may be on the way for people with compromised immune systems, severe allergies, or who otherwise have to be wary of airborne nasties. A team of scientists have created something known as a soft x-ray electrostatic precipitator, or an SXC ESP for short. It filters all manner of bacteria, allergens, viruses, and ultrafine particles from the air – plus, it kills everything it catches.

Electrostatic precipitators (ESPs) already exist, and work by applying an electrical charge to airborne particles, which are subsequently drawn to an oppositely-charged metallic collection plate. According to the researchers, however, ESPs aren’t very efficient at trapping smaller particles – specifically in the submicrometer and nanometer size range.

http://www.gizmag.com/soft-x-ray-electrostatic-precipitator/26074/

E não sabem como montar a minha Ray-Gun?

Fácil, basta seguir este Vídeo, passo-a-passo:

Ray Gun, tried and tested

A hommage to all those cool Sci-Fi movies, a Fluorescent Acrylic Ray Gun, with place for Electronics on the box, and a hole trough the Barrel, to place the Laser Pointer, LED, whatever.
You can use a Rubber Band as the Trigger spling, and it will also hold the back lid in place!

http://www.ponoko.com/make-your-own/toys/ray-gun-tried-and-tested-9476

Tomem nota!

Nunca ficaram fulos da cabeça, por terem à mão o Bloco-Notas...

Mas nenhuma Caneta? 

Eis o Pen&Note...

Podem guardar a caneta, ou ao lado do Bloco-Notas, ou por cima dele;

1 - Enfiam a parte rectangular no Cartão da parte detrás do Bloco-Notas;


2 - A parte redonda, onde encaixa a Caneta, fica como na Imagem 3D (categoria!) embaixo, ou rodam-na para baixo, e empurram-na para ficar ao lado do Bloco-Notas, o que vos der mais jeito.

Pen&Note

A Pen holder for your Notebook, so you never lose the Pen! 

You can hold the Pencil/Pen/whatever on top or to the side of the Notebook. 

1 - Plug the slotted part onto the side of the Cardboard back of the Notebook; 

2 - Either place the round part, the Pen holder, on top of the Notebook, as on the image, or rotate it and slide it into the side of the Notebook.

 http://www.sculpteo.com/en/design/pennote/NfsSMPUm

O que é que eu estava a pensar?

Tanto trabalho, tanta peçinha, tanta complicação...

Não sou eu um Inventor?

Basta deixar-se o Papel ser quem ele é!

Uma série de Tiras de papel, que dobram naturalmente, enfiadas em espaços numa caixa, e já está!

Vai funcionar às mil maravilhas...

PENSO EU! 

LOL

Borlas e telelés

Eis uma Borla, uma Moldura para fazerem em Cartolina, ou o que quizerem;

É uma Moldura para fazer em Cartolina, para Quadros de 3mm de espessura, e basta ajustar as medidas do rectângulo grosso para as do Quadro, etc. e depois ajustar as medidas da Moldura. Tem um rectângulo alto para se poder imprimir em duas folhas de A4, e depois, ajustar as mesmas. 

Can't give it a rest!
Here's my new Frame version, and I'll add the Vector File, so you can make your own Frames, just change the Dimensions:

And here's the File: 
Link 

The thick Rectangle stands as a guide, for the 3 mm thick plate, and the inner sides of the Frame are 3mm shorter, so you can plug the thing on the Frame. I also added a tall Rectangle in the middle, so you can print the 2 templates on plain A4 Portrait-oriented sheets of paper, then align those into just one.

http://www.nicepapertoys.com/profiles/blogs/can-t-give-it-a-rest

Não têem jeiteira nenhuma para desenhar em CAD?
Eis uma ajuda da  Ponoko:
A Formulor dá um jeito, com este app que está na Net:

No CAD skills? No problem. Formulor lets anyone create lasercut designs 

Berlin-based company Formulor was founded by a team with over ten years of experience in laser-cutting and design. Formulor launched in 2010 and became our first manufacturing partner in the EU.
With the release of the Personal Factory API, the Formulor team began working on a whole new site and improved user interface.
The new Formulor site is now live and features a great built-in design tool that lets you create your design right on the page.
Just pick your material (25 to choose from), select a size and thickness, then start creating your design with the various shape, text, and line tools.

http://blog.ponoko.com/2012/06/07/no-cad-skills-no-problem-formulor-lets-anyone-create-lasercut-designs/

...E algo de fantástico, para quem já lutou com écrans de Telemóveis, que insistem em des-calibrar, um écran onde aparecem e desaparecem Botões em relevo!

Tactus Technology display brings physical buttons to the touchscreen 
By Dario Borghino 
California startup Tactus Technology recently caused plenty of "oohs" and "aahs" at SID Display Week 2012. The prototype touchscreen the company presented featured buttons that can rise out of the flat surface of the screen at the user's whim, disappearing completely once they are no longer needed. Beneath the surface of the screen are a number of microscopic channels that can be prearranged by the manufacturer, and a small amount of a clear oily substance. When the physical buttons are "switched on" by the user, the clear substance is pumped through the channels and the solid buttons magically rise out of the display. When the keyboard is switched off, the buttons disappear completely, leaving the user with a full-sized touchscreen device.

http://www.gizmag.com/tactus-technology-tactile-touchscreen/22852/

3 Dígitos!

O BusStopper, versão 3 Dígitos, como deve de ser!

Assim, já se pode apanhar o Autocarro número 12...  

Planos à venda por 3 Dólares, aqui:
http://www.ponoko.com/design-your-own/products/busstopper-pop-up-segment-model-8071

Nice Paper Toys!

Eu em Nice Paper Toys!!!

Já que esta ideia foi-me inspirada pelas criações fantásticas de Rob Ives, é justo que a apresente neste Site de papercraft!

Vão lá:

http://www.nicepapertoys.com/profiles/blogs/hello-there

Joao Marcelino, ao vivo e a cores

No Youtube, por betaionline:

João Marcelino, Autor do livro "Propriedade Invenções e Patentes" dá-nos uma rápida panorâmica do sector da propriedade intelectual em Portugal.

E podem comprar o livro já agora, basta carregarem na imagem dele, aqui ao lado, à direita:

Como funciona o BusStopper 2

Os Segmentos do novo BusStopper funcionam duma maneira simples..

Para fora:

Para dentro:

Vão lá:
http://www.ponoko.com/design-your-own/products/busstopper-pop-up-segment-model-8071

Uma nova versão do BusStopper!

Aqui está o Protótipo, e as vantagns, sobre a outra versão, são as de ter menos peças, ser mais resistente ao uso, e muito mais simples!

Os Planos estão à venda, por um preço simbólico, é só ir aqui: 

http://www.ponoko.com/design-your-own/products/busstopper-pop-up-segment-model-8071

Lego às carradas!

É pó Menino e pá Menina, e para uns Passarões que ainda hoje, gostam de Lego: 

Lego e mais Lego no Campo Pequeno

por Elisabete Silva

Ao entrar, o difícil é decidir por onde começar. Três milhões de peças de Lego compõem cidades, monumentos, naves espaciais, comboios... É a maior exposição em Lisboa do género que promete atrair crianças e adultos.  

O T-Rex tenta dominar a praça do Campo Pequeno, mas o seu tamanho rivaliza com o tigre, o urso ou o camelo (que pesa 500 quilos). São sucesso garantido por serem vistosos, mas é nos pormenores que está o mais apetecido na exposição que hoje abriu portas.
Na cidade espacial nada falta. Naves, comboios, radares, com direito a movimento para dar mais realismo. Mas numa cidade mais "real", também é impossível não se ficar perdido em tanto pormenor, cada um correspondente a horas e horas de trabalho.

http://www.dn.pt/inicio/artes/interior.aspx?content_id=2446602

Continuando na pura Diversão, Estudantes do MIT transformaram um Prédio, num jogo de Tétris!

C'um caneco!

MIT students turn whole building into huge game of Tetris 

By Paul Ridden

 The two-hundred and ninety-five feet (ninety meter) tall Building 54 on MIT's Cambridge campus has become the canvas for a number of carefully planned and daringly executed visual displays over the years, not strictly allowed by the administration but often looked upon with some appreciation. The building is home to the Institute's Department of Earth, Atmospheric, and Planetary Science (EAPS) and has a host of meteorological instruments and radio communications equipment on its roof - but its the grid-like windows to the front that have become the main attraction to hackers, as they are known. The latest hack is the successful realization of a long-standing challenge, a huge playable game of Tetris.

http://www.gizmag.com/mit-tetris-hack/22346/

...E que tal fazerem a vossa própria Máquina CNC?

Make Your Own DIY CNC

This instructable outlines the assembly process of my 2nd generation CNC machine which I designed to be simple to build and quiet enough to be apartment friendly. I have included example projects that I have made in the first two weeks of using the machine to demonstrate its capabilities.

This is the second CNC machine that I have designed and built. My first machine was based off of oomlout’s instructable “How to make a Three Axis CNC Machine (Cheaply and Easily)” (by far my favorite instructable and the one that got me hooked on the site). It was moderately successful, cutting a number of parts from foam (a summary of parts made can be found on my abandoned blog here along with some build photos). The lack of overall stiffness and play in the linear mechanisms meant that plywood and plastics could not be cut effectively. The biggest downfall of the machine was the difficulty to setup and square the axes and lacked the ability to make fine adjustments once set up. The drive pulleys were sandwiched between the gantry sides and if a pulley loosened the entire gantry structure had to be disassembled and put back together and squared all over again (a couple evenings of work).

http://www.instructables.com/id/Make-Your-Own-DIY-CNC/

 

Uma grande notícia da malta do Arduíno, mais específicamente o Daniel Berenguer estas Miniaturas Wireless, vão dar para realizar muita ideia...

panStamp - Wireless Arduino-compatible miniatures

Dear group members, we are in the process of releasing our new low-power wireless pansTamps. These modules are programmable from the Arduino IDE. Availability of libraries, stack, Python tools and a web-based automation platform called Lagarto. Simple and rapid upload of values to the cloud (Pachube, ThinkSpeak and open.sen.se). We're also running a campaign on Indiegogo in order to get funds for the project:
http://igg.me/p/89807?a=531961

Introduction panstamp.com

panStamp is an open source project created for the enthusiasts that love measuring and controlling things wirelessly. panStamps are small wireless boards specially designed to fit in low-power applications, simple to program...

 

Areia robótica, um Concurso da Ponoko, e um Site para Hobbies

Eis uma ideia ambiciosa, Areia composta de nano-bots, que forma Moldes, um sonho prestes a realizar-se para todos os que querem ter moldes para uma Fundição, a partir de ficheiros 3D: 

Self-sculpting smart sand could assemble itself into solid replicas of objects

By Jan Belezina

Research currently underway at MIT’s Distributed Robotic Laboratory (DRL) could lead to an innovative replicative manufacturing technique with the disruptive potential equal to that of 3D printing. Imagine a sand-like material that could autonomously assemble itself into a replica of any object encased within. Incredible though this may sound, the DRL researchers have already managed to build a large scale proof-of-concept, with 10-mm cubes acting as the grains.

Before we go into how these cubes - or "smart pebbles" - work, let’s sketch out the general concept. The idea is to create objects using a subtractive method, where excess material is removed just like when carving in stone. Each grain of smart sand would be a self-contained micro computer. These tiny machines would use an elaborate algorithm to communicate with the neighboring particles in order to establish the exact position and shape of the input object so that it can be replicated.

http://www.gizmag.com/smart-sand-mit/22130/

A Ponoko oferece como Prémio, um Cortador de Papel CNC, vejam este Concurso:

Make a lasercut paper project with Ponoko to win a Silhouette Cameo electronic cutting tool!

If there’s one essential material for creativity it’s paper. It’s so approachable, so familiar, so versatile. And you can lasercut it! : )

We’ve added paper cardstock to the materials catalog at both the Ponoko US and Ponoko NZ laser-cutting hubs. And we’d love to see what kinds of stuff you can make with it: artwork, business cards, product packaging, maybe a Mother’s Day card? We’re even throwing in a nice little prize…

Make a lasercut paper project and you could win a Silhouette Cameo!

http://blog.ponoko.com/2012/04/12/make-a-lasercut-paper-project-with-ponoko-to-win-a-silhouette-cameo-electronic-cutting-tool/

E um Site com muitas coisas para engenhocas:

Hobbies

Find what you need at Hobbies.com! Here you will find all of the Hobbies you can't find anywhere else, including RC Cars or RC Planes. With our help you can find the right products and brands at the lowest prices online only at Hobbies.com. Let us help you meet your shopping needs while providing you with the best selections available online today. All this in a simple to use shopping interface. Checkout securely online with the help of Hobbies.com. Have a great day!

http://productportals.wishpot.com/?name=hobbies.com

A ElastomatiK aparece no Blog da Razorlabs

É sempre bom que apreciem o nosso trabalho, por isso, cá vai:

RazorLABber Showcase: ElastomatiK by Edgar Castelo 

March 26th, 2012 

We’d like to share a neat little video with you from Edgar Costelo, who documented the process of his ‘ElastomatiK’ project from receiving and unpacking his RazorLAB order, then through the assembly to the finished article by taking a series of photo’s along the way and putting them together to create a short film clip. We love to see what happens after we pack each project and send it off to it’s owner, so we were really pleased that Edgar had taken time to post the video.

http://www.razorlab.co.uk/2012/03/razorlabber-showcase-elastomatik-edgar-castelo/

Fab Café!

Via o Facebook da Ponoko, via Springwise via FabCafe, eis um café onde se grava em Laser CNC!

Would you like vector engraving with your espresso?

Japan is the source of all that is weird, wacky and wonderful in integrating culture and technology. Since opening on the 7th of March, FabCafe in Shibuya-ku, Tokyo brings the world lattes with laser cutting!

http://www.fabcafe.com/blog/category/english/

RazorLabs com desconto, MIT com um Concurso, e Sculpteo 3D Printing Cloud Engine!

Os nossos amigos da Razoelabs estão a fazer mais um Desconto, 20% em todas as Encomendas, lembrem-se foi assim que eu mandei cortar a ElastomatiK lá:

Hello there RazorLABbers!

Today is the first day of spring, time to shake off those winter blues and get making!

It's nearly Easter time, the time to over indulge, and we thought we would spoil you with a treat of our own - 20% off all orders until midnight 9th April! Use this coupon code: ZLHESS to redeem your Easter treat and spend your holidays assembling your latest project. Spread the springtime joy and share with your friends!

For all the students out there, spring is also the time to start knuckling down and the hard work begins. We know it's a tough time and we want to help ease the pressure so we offer all students a 10% discount on their orders. To take advantage of the offer use coupon code: YCHPEO (expires 31/12/12). Share with your class mates, and if you're not a student yourself, perhaps you know someone who is? Son, Daughter, brother, sister, cousin, neighbour...

http://us1.campaign-archive2.com/?u=7dc9e6e8f961d3c4e1070d2c1&id=7de19eeb38&e=6c6089cd51

O MIT em Portugal tem de novo o Concurso "Buiding Global Innovators", para criar Inovadores a nível Global:

Building Global Innovators is back!

3^rd Edition is open - submit your application here.

Deadline: 1^st May

 

Here's a few numbers from our track record:

• 80% of the promoters succed in launching a start-up
• 69% raised funding, of which over 60% is from Venture Capital sources
• 50% of the start-ups doubled their teams, creating 35 new jobs

3-step rule to preparing a winning submission:

1. Read Rules & Regulations
2. Get inspired by previous year's Award winners (1^st Ed, 2^nd Ed.)
3. Then prepare and send us your submission

Beeing one of the 20 selected teams really depends on your effort

 http://mitportugal-iei.org/

E Retalhistas, eis uma maneira de personalizarem os vossos Produtos, através da Sculpteo:

So You Are Thinking About Integrating the Sculpteo 3D Printing Cloud Engine Into Your Store?

Posted on 2012/03/19 by Mathilde B.

 

Sculpteo is the company that develops the 3D Printing Cloud Engine, the first ever solution for mass customization through 3D printing.

You are an online retailer and you want to propose some great customization features to your customers? The Sculpteo 3D Printing Cloud Engine has been designed as an easy way to integrate 3D printing to your offer.

http://blog.sculpteo.com/2012/03/19/so-you-are-thinking-about-integrating-the-sculpteo-3d-printing-cloud-engine-into-your-store/

 

Mais devagar

Eis uma sequência de imagens mais lenta:

Está à vossa disposição, aqui:

http://elastomatik.wordpress.com/

Uma sequência de imagens do ElastomatiK

Eis Um Time-Lapse da montagem do ElastomatiK, peças cortadas nos Razorlabs do Reino Unido:

Ainda aperfeiçoei mais a coisa, e vai de mandar os Ficheiros melhorados para a Ponoko!

Está à vossa disposição, aqui:
http://elastomatik.wordpress.com/

ElastomatiK, cortada e pronta a enviar pelo correio!

Já juntei mais opções de compra, por isso podem simplesmente comprar e montar a pistola, se viverem nestes Países:

Para além da Itália para Portugal, agora, América, Alemanha, Nova Zelândia, e Brasil, ainda que, no caso do Brasil tenham que importar a coisa da Grâ-Bretanha...

Vejam a opção que melhor vos sirva, aqui:

http://www.google.com/cse?cx=015830374398894034702%3Agln6g_ma26e&ie=UTF-8&q=elastomatik&siteurl=www.ponoko.com%2F#gsc.tab=0&gsc.q=elastomatik&gsc.page=1

E se viverem noutro lado, vão aqui, e carreguem onde está sublinhado,que eu vou ver se dou um jeito!

Já podem comprar a ElkastomatiK, no Brasil!

Como não quero que vos falte nada, aí vai como comprar as peças, cortadas no Reino Unido, e enviadas para o Brasil, mais baratas que feitas nos EUA, por causa das despesas de Correio da América!

Com um grande Saravá para todo o pessoal, do vosso amigo Edgar.

http://www.ponoko.com/design-your-own/products/elastomatik-uk-brazil-7167

Coisas boas à fartazana!

Que tal 306 feeds sobre o Arduíno, para quem queira fazer... Bem, um pouco de tudo?

306 Arduino (and related stuff) RSS feeds

ArduinOPML, _many_ RSS feeds about Arduino and DIY for your blog reader!
Upload this file into your RSS reader and enjoy!

- contains ArduinOPML.xml, an OPML file (should be uploadable into your reader)
- contains ArduinOPML.raw.txt, a text file containing a raw list of feeds

https://github.com/garnould/ArduinOPML

Só para amostra do que encontram lá, que tal um Site chamado Gadget Factory, que exibe esta Gigajoga que vos permite montar a vossa máquina retro de Arcade?

Ou então, este projecto, que capta os sinais dum Tele-controle, e os emite, ao toque dum botão:

http://www.gadgetfactory.net/

Um vídeo de demontração da Impressão 3D duma máquina profissional, a Dimension SST, cortesia do Site Prototype Zone:

E mais uma versão da minha ElastomatiK, desta vez, parecida com uma Pistola Austríaca de renome...