Blog Posts

Mostrar mensagens com a etiqueta servo-motores. Mostrar todas as mensagens
Mostrar mensagens com a etiqueta servo-motores. Mostrar todas as mensagens

terça-feira, 13 de novembro de 2018

6 canudos! E impressão em papel(!) , uma serra motorizada para imprimir, servos, e um avião em cartão!

A pedido de várias Famílias, eis uma Zarabatana-Revólver para aumentar a Diversão inocente das Zarabatanas de Cones de papel, que todos já fizemos...

E agora, fazemos outra vez, prá Filharada, e atiramos com eles, também, "para mostrar como é"! 
LOL
Pois agora, são 6 de cada vez, cortesia deste vosso amigo, para se divertirem com as vossas Impressoras 3D, com um projecto fácil de fazer, só 4 peças, e que se monta num instante:







Six Shot Blowgun
Edgar Castelo

3D model description
A Blowgun with a revolver's cylinder, 6 shots in rapid succession. It uses 20 mm PVC tubing, and it's just 4 pieces and a rubber ban, all easy to print and assemble.

Some 3 and a half hours to print, 98*44*30 mm, the larger part.The rest is the PVC tubing;
One large PVC tube part is the barrel, and 6 smaller tube parts, along with 2 other printed parts, make the cylinder.
The last 2 are a Rubber band, and the cylinder holding piece, that holds the cylinder, but rotates.















Não só respeitador do Ambiente, (embora o PLA seja tão biodegradável, que mais, era comestível...), como, talvez, uma forma de ter um material de suporte, para impressoras de 2 ou mais cabeças, eis algo a seguir de perto...
Imprimir 3D em POLPA DE PAPEL!




Designer Develops 3D Printer That Spits Out Wet Paper Pulp
Tyler Koslow

Designer Beer Holthuis has developed the Paper Pulp Printer: a 3D printer that squirts out fascinating objects made from wet paper pulp. The project aims to give artists and designers a way to 3D print more sustainable objects.
3D printing is a marvelous and innovative technology that enables us to create even the most complex designs, but one issue that has concerned environmentally-minded makers is the excessive use of plastic materials. Sustainability is becoming a major focus for many 3D printing companies and enthusiasts, leading to the development of recycled materials and other more earth-friendly processes.
Taking inspiration from the mischevious kids that sat in the back of class shooting spitballs at one another, designer Beer Holthuis has developed the Paper Pulp Printer: a 3D printer that extrudes sopping wet paper. Using a bit of natural binder and wet paper, the designer created a 3D printer that could extrude a thick bead of pulp that could be built up layer-by-layer into a 3D object.












Eis uma muito boa razão para se ter uma Impressora 3D;
Fazer dela, UMA MÃQUINA QUE FAZ MÁQUINAS!
Isto vai-vos dar muitas ideias, e fazer uma Oficina, a partir de Filamento, é habilitar a Malta a ter outro nível de vida...
Ou, apenas, uns momentos bem passados!



Power Hacksaw by 3D Printer V4.0
Tomlie_Xie May

This time, I use bakelite to make the base. And the base reduced to 30cm. I have made two hacksaws for my friends.
Now, I'm building the v5 hacksaw, its base is 270x135mm and more easy to make. i'll update the STLs after test finished.











Pessoal da Robótica, e Tele-controle, aprendam umas coisas sobre os Drivers, que impelem os Servo-motores a fazer o que lhes mandam:




556 Servo Driver
hombremagnetico

Servos (also RC servos) are small, cheap, mass-produced servomotors used for radio control and small-scale robotics. The are designed to be easily controlled: the position of the internal potentiometer is continually compared to the commanded position from the control device (i.e., the radio control). Any difference gives rise to an error signal in the appropriate direction, which drives the electric motor either forwards or backwards, and moving the shaft to the commanded position. When the servo reaches this position, the error signal reduces and then becomes zero, at which point the servo stops moving.
Radio control servos are connected through a standard three-wire connection: two wires for a DC power supply and one for control, carrying a pulse-width modulation (PWM) signal. The standard voltage is 4.8 V DC, however 6 V and 12 V is also used on a few servos. The control signal is a digital PWM signal with a 50 Hz frame rate. Within each 20 ms timeframe, an active-high digital pulse controls the position. The pulse nominally ranges from 1.0 ms to 2.0 ms with 1.5 ms always being center of range

https://www.instructables.com/id/556-Servo-Driver













Mais fiéis ao original, de certeza, que as Caravelas feitas com Pau-de-Fósforo, e com aplicações em toda a espécie de Espectáculos, Desfiles, e Filmes amadores, vejam como se fazem, no humilde cartão, Modelos convincentes...








Boeing 737-800 Build Out of CARDBOARD
Lalramsiam
 
Hello. Today, I am going to share with you, how I made an airliner (Boeing 737-800) out of CARDBOARD.
This is my first instructable, so please forgive me if i post something incorrectly.











sexta-feira, 20 de abril de 2018

Servo-Motores para todos! E um Sintetizador de mistura, Filamento de Borracha, aprendam OpenScad, e reparar Ficheiros 3D!

Qualquer motorzinho pode agora ser um Servo-Motor?
Com FEEDBACK?
E  com uso para motores lineares, e motores de todo o tamanho?
Uma muito boa Notícia...







New products: Jrk G2 USB Motor Controllers with Feedback
Jan

After many months or years of work (depending on how you look at it), I am happy to introduce our newest motor controllers, the Jrk G2 USB Motor Controllers with Feedback, which we are releasing today in four power variants:



Jrk G2
18v19

Jrk G2
24v13

Jrk G2
18v27

Jrk G2
24v21
Recommended max
operating voltage:
24 V(1) 34 V(2) 24 V(1) 34 V(2)
Max nominal
battery voltage:
18 V 28 V 18 V 28 V
Max continuous current
(no additional cooling):
19 A 13 A 27 A 21 A
Dimensions: 1.4″ × 1.2″ 1.7″ × 1.2″

The main purpose of the Jrk G2 family is to enable feedback-based control of DC brushed motors, simplifying closed-loop control of things like the position of an actuator. An example that is probably familiar to most of us is the common hobby servo that has an output shaft that can rotate to various positions as commanded over a simple interface. The Jrk motor controllers can be used for giant versions of those servos, and they can also be used in many other systems as long as you can somehow get feedback in the form of an analog voltage or a frequency. Analog voltage feedback is often easy to get from potentiometers that can serve as angle or position sensors.

https://www.pololu.com/blog/763/new-products-jrk-g2-usb-motor-controllers-with-feedback













Um Sintetizador que mistura amostras de som até 4 delas, e em várias percentagens das mesmas, é o que podem construír com um Raspberry Py, neste Projecto:






Building the Google Open Nsynth Super
Andrew Back

A Raspberry Pi and machine learning powered instrument for generating new unique sounds that exist between different sounds.
NSynth (Neural Synthesizer) is a machine learning or “AI” algorithm from Google and collaborators that uses a deep neural network to learn the characteristics of sounds, and then to create a completely new sound based on these. More than simply mixing sounds it actually creates an entirely new sound using the acoustic qualities of the original sounds.
Open NSynth Super is an experimental physical interface for NSynth that is based around a Raspberry Pi, custom PCB and a simple laser-cut enclosure. It comes provided with turnkey O/S images that bundle preconfigured software and firmware, along with sets of example sounds — meaning that you don’t have to go through the extremely resource-intensive process of generating audio files in order to start experimenting with the synthesizer.
The PCB design, microcontroller firmware, software and enclosure design are all published under open source licences, meaning that anyone is free to build their own Open NSynth Super.

https://www.rs-online.com/designspark/building-the-google-open-nsynth-super













Mais coisas boas da Hoffman Engeneering, um Filamento de Borracha, que se porta mesmo como Borracha, e tem a aparência de Borracha!
E ainda, uma armação para Ventoínha de arrefecimento, para descarregarem.


 




Filaflex - 3D Printable Rubber!
Hoffman Engineering

I try out some more flexible filament, this time Filaflex by Recreus. I also add a cooling fan, which makes a drastic difference in print quality!

https://www.youtube.com/watch?v=L1wHvG59bms












OpenScad é um poderoso Programa CAD, mas difícil de aprender.
Por isso, aprendam com quem sabe, que aqui vai um Tutorial:





OpenSCAD Tutorial for Beginners (5 Easy Steps)
Michael Jones


OpenSCAD is a powerful, free and open source modelling tool that lets you make precise 3D models with just a few lines of code. With the right setup, you can even make adaptable, "parametric" models. In this OpenSCAD tutorial, we'll get acquainted with the software, review a simple example and then discuss how to make parametric designs.

https://all3dp.com/2/openscad-tutorial-for-beginners-5-easy-steps/


















É duro, ver um Objecto que idealizaram ser mal-impresso como num Pesadelo!
E se a culpa, não é da Máquina, mas do objecto, eis como podem reparar o ficheiro 3D, para ser transformado num Objecto Imprimível:



How to Repair STL Files with 3 Free STL Repair Software Tools
Dibya Chakravorty

Nothing is more frustrating than a 3D model that won’t print. STL files need to be watertight, have the right wall thickness and be properly optimized in order to be printable. Even the most experienced 3D designer will sometimes leave unprintable defects in the model. So you need software to repair your STL files.
If you have a broken STL file, your Slicer software will often warn you about the defects. But in the worst case, the slicer won’t complain at all. You will start printing as usual, spend time and money, and eventually land up with a failed print.
Another common scenario is when you try to upload an STL file in an online 3D printing service like i.materialize or Sculpteo, but get an error message saying that the file size is too big. In this case, you are dealing with a bloated STL file.
So what do you do in these situations? How do you repair STL files to get a printable version?
In this article, we introduce you to the best free software that can check your STL file for errors and also repair STL files automatically to produce a printable version.

 https://all3dp.com/1/best-free-str-repair-software-tutorial-netfabb-microsoft-3d-builder/









quinta-feira, 29 de março de 2018

Motor drivers! E um Hexápede, um Segway à pata, soldar a partir de Baterias, e Vidro metálico?

Tanto para o Arduino, como para o Raspberry Pi, já têem estes bem acessíveis drivers, da Pololu, para os vossos Robots, e automatismos, e o que mais for, controlando um par de motores, motores esses duma enorme variedade de Motores e Voltagens.
É bom.

 




New products: Dual MAX14870 Motor Drivers for Arduino and Raspberry Pi
Patrick
For my birthday, I am excited to share two new products to help get your projects moving: dual motor driver boards for Arduino and for Raspberry Pi based on Maxim MAX14870 drivers, which on these boards (without additional cooling) can power motors with a continuous 1.7 A (2.5 A peak) from a voltage source anywhere from 4.5 V to 36 V. This makes the driver ideal for powering a wide range of motors including our high power micro metal gearmotors, and our 12 V 20D mm metal gearmotors. We like the MAX14870 so much that already we make a single driver carrier for it, and we use it on our A-Star 32U4 Robot Controller SV. These new boards make it easy to control two motors using the MAX14870 with an Arduino or Raspberry Pi.
https://www.pololu.com/blog/759/new-products-dual-max14870-motor-drivers-for-arduino-and-raspberry-pi



 


 




O termo correcto é mesmo Hexápede, (como em "quadrúpede"), aqui está um Robot de 6 patas, que podem construír, e este, por ser alongado, move-se mais como os Insectos:





Capers II, a Hexapod Robot
Toglefritz

This Instructable will show you how to build your very own hexapod robot, I call the design Capers II.
A hexapod robot is a robot with six legs. Each leg is actuated by three servos: one for forward/backward movement, one for up/down movement, and one to bend the leg in the middle. This gives the robot three degrees of freedom, allowing it to move in any direction.
Some hexapod robots are symmetrically designed, with the six legs equally spaced around a linearly symmetrical body. Capers II, on the other hand, has a slightly elongated body, giving the robot a more natural appearance and the ability to use gaits reminiscent of insects.

https://www.instructables.com/id/Capers-II-a-Hexapod-Robot/









Na brincadeira, na palhaçada, e um pouco fazendo troça dalguma Gadgeteria, cá vai uma Segway à lá Pata, isto é a pedalar, e é para quem quer...
Gandas malucos! 
Impecável.







Steampunk Segway ( Legway )
bdring

A self balancing, human powered, steampunk styled, Segway. All you need is a brave self balancing human. This is the ultimate green vehicle for all you eco conscious steampunkers. Is that an oxymoron? I made this out of mostly found materials. This was my first steampunk styled build. Any good suggestions on making it look better will be incorporated as long as the materials are cheap and easy to find. I have been calling it the Legway in reference to the propulsion method. Yes, I know about those Lego self balancers of the same name.

https://www.instructables.com/id/Steampunk-Segway-Legway-/










Algo que acho bem ùtil, por contraste ao projecto anterior, é esta ideia de ter um Ferro de Soldar que funciona com uma Bateria de Berbequim! 
Façam uma coisa destas.







Power Your Soldering Iron With a Drill Battery!
Chris Ray

Back in June of 2017 I moved out of my parent's house and started renting my own. One of the many things that changed was my workspace. I went from a 12' x 13' room to a 4' desk which meant I had to make some changes. One of the major changes was switching from a soldering / hot air rework station to a TS-100 as my main iron. I ended up falling in love with this little thing but I still didn't have a way to make it mobile. That is where this little circuit comes in. I designed this circuit to fit onto a Dewalt 20v Max battery and provide power to my iron, as well as protect the battery and charge my phone.

https://www.instructables.com/id/Power-Your-Soldering-Iron-With-a-Drill-Battery/









Uma coisa para o Futuro, que com a rapidez com que isto tudo agora se desenvolve, pode ser para a semana que vem, são estas ligas Metálicas amorfas, que não formam Cristais, o que lhes dará uma data de novas propriedades eléctricas e estruturais...






Researchers Reveal Method to 3D Print Metallic Glass Alloys in Bulk
Matthew Mensley

Materials Science and Engineering researchers at North Carolina State University recently detailed their method to produce large amounts of metallic glass alloys using 3D printing. The development could lead to better efficiency in electric motors and tougher materials and structures.
Researchers at the Material Science and Engineering department at North Carolina State University have turned to 3D printing to create a means to produce bulk amounts of metallic glass alloys. Typically produced in small amounts, the material (also known as amorphous metals) is notoriously tricky to produce in any large amount.
Unlike most other metals, metallic glass alloys lack a crystalline structure. With an amorphous structure instead, they boast “exceptionally desirable properties”, says Zyanab Mahbooba, a Ph.D student at the department and first author of the research’s paper.

https://all3dp.com/researchers-reveal-method-to-3d-print-metallic-glass-alloys-in-bulk/

















sexta-feira, 15 de janeiro de 2016

Sculpto 3D em Inglês! E Perfis em Alumínio, aprender a desenhar, Motores na Robótica, e um Carro de Imanes

A Impressora Sculpto3D, já mencionada antes aqui, por ter um revolucionário Sistema de Impressão 3D a partir de esboços em papel(!), vem agora, a pedido de várias Famílias, numa Versão em Inglês, o que nos facilita imensamente a vida!
Vem com um Link para encomendar.


Sculpto 3D Printer &App
Ordering Link 
Sculpto is the future of toys, making 3D printing for everybody, kids as well as adults. Print your own toys, a new unique bracelet, decorations for the holiday, the spare part you were missing or perhaps a new bowtie.
The stage is set for many hours of fun, play, learning and companionship with a Sculpto 3D printer in the family. The only limit for what you can create together is your imagination.
With a Sculpto 3D printer in the house everybody can print whatever they want. The kids no longer have to wait for mom and dad to drive them to the toy store, no, they can just print their own.
Sculpto’s family friendly 3D Printer and App is not in the stores yet, but you can already secure your own now as, and get it as one of the firsts.  

http://sculpto.dk/?lang=en








Incrívelmente ùtil por todo o lado, na Oficina do Engenhocas, para construír de tudo um pouco, de Protótipos a Impressoras 3D, passando por toda a espécie de Máquinas-Ferramenta de que se lembrem, eis uma loja de Perfis, com um Blogue porreiro:



About APM 
Alu Profiles Manchester was founded in 2015, the web store serves as a platform, by where designers or makers have access to materials to prototype a range of different projects.
We like to think of products we sell as modern day Meccano, but much more sturdy, versatile and perfect for prototyping 3D automated machines. 









..Um Ebook bem bom, para aprenderem a desenhar, façam favor de APRENDER, que é, ainda por cima, GRÁTIS!
Parabéns, Ivan Querino, parabéns, Brasil!



Chegou a hora de realizar o sonho de Aprender a Desenhar o que você quiser sem sair de casa!
Acredito realmente que a arte pode salvar vidas e quero compartilhar isso com o maior número de pessoas possível. Essa é minha missão.
Ivan Querino Ilustrador, Professor e Palestrant 









Não se é Engenhocas, sem se acabar por acumular uma série de Motores Eléctricos, e eis que vem este noisso amigo, Taifur, ajudar-nos a encontrar o que fazer com eles, no campo da Robótica, e não só:




Complete Motor guide for Robotics

taifur 
Robot is an electromechanical device which is capable of reacting in some way to its environment, and take autonomous decisions or actions in order to achieve a specific task.
Roboticists develop man-made mechanical devices that can move by themselves, whose motion must be modelled, planned, sensed, actuated and controlled, and whose motion behavior can be influenced by “programming”.
This definition implies that a device can only be called a “robot” if it contains a movable mechanism, influenced by sensing, planning, actuation and control components. Motors and actuators are the devices which make the robot movable. Motors and actuators convert electrical energy into physical motion. The vast majority of actuators produce either rotational or linear motion.
In this instructables I will explain more common types of motors and actuators, their basics and how to control them. 










Sugerido por mim, a eles, e em boa hora, eis que a KJMagnetics nos oferece mais um simpático Instructable, sobre como construír em minutos este carrito, que é tanto Didáctico, quanto divertido!



Magnet Car

KJMagnetics 
Here is a quick, easy way to create a self-propelled car using simple household items! All it takes is some magnets, a AA battery, and some aluminum foil!
As previously mentioned, you only need three things to complete the project-- a few magnets, a AA battery, and aluminum foil. 




quarta-feira, 14 de agosto de 2013

Pololu é Maestro! E um braço Ciborg, e Transformers Nintendo

Eis algo que faz de qualquer um um Mestre de Robótica;
Permite-vos criar Robots com movimentos programados, Máquinas que fazem de tudo, controladas por não importa o quê, e com botões, sensores, e o que mais, ligam motores, comandam Servo-motores, para o que queiram!
Vejam esta apresentação, onde uma Geek toda fresquinha, vos explica as capacidades fantásticas desta Engenhoca:


New Video: Getting Started with the Maestro Servo Controller

Emily, an engineer at Pololu, put together a short video demonstrating how easy it is to use some of the key features of our Maestro USB servo controllers. If you want to get a better sense of what the Maestro is capable of or need help getting started with it, check out the video!










Porque um pouco de diversão é bom, eis como construírem o vosso Braço Ciborg, com nem mais nem menos que uma Metralhadora Gatling, com este Instructable:





Gattling Gun Cyborg Arm

M.C. Langer
Maker Faire. I couldn't go only with one Cyborg Arm. Nah! I had to go with TWO FREAKING HEAVY CYBORG ARMS!

So, I made the second one. It's like the first one, just changing the pincers for some kind of gattling gun, that spins at high velocity and has a red led, giving the "FIRE" effect.















E para surpreender toda a Malta, eis como fazer Transformers Nintendo, com Lego!




LEGO Nintendo 64 Transformers

Baron von Brunk


Created specifically for the Toy Brick Contest in the summer of 2013, I present to you my latest LEGOformers: Ultra Hexacon and Tetragon, the transforming Nintendo 64 and controller, along with their transforming game pak minions Hot-Shot, and Mecha Kong! These original LEGO models are made in near-perfect size and proportions to authentic N64 components, and can transform completely — by “transform completely”, I mean each robot can transform from N64 accessory to robot and back without detaching/removing parts, with the exception of Tetragon’s controller cord. Ultra Hexacon is to this date, my most durable and articulated Transformer model built, with great flexibility and joint strength; he can also stand and be posed without falling over or having pieces break off. With the exception of the custom stickers/labels, every single piece in these toys are 100% LEGO — bricks, plates, slopes, tiles, wedges, and Technic parts. No glue, paint, cutting, nor 3rd party custom pieces.