Blog Posts

Mostrar mensagens com a etiqueta pvc. Mostrar todas as mensagens
Mostrar mensagens com a etiqueta pvc. Mostrar todas as mensagens

sábado, 24 de agosto de 2019

Um Magnéstico dum Arduino, 56 usos de PVC, as melhores Gravadores Laser, as mais baratas Impressoras 3D, e 407 Ferramentas

Aqui está um uso para um Arduino, um Magnetoramo, para o que possam surgir que necessite de um medir algum Campo Magnético...







Arduino Magneto medidor
amamitof7 
What are we building?
Humans can't detect magnetic fields, but we use devices that rely on magnets all the time. Motors, compasses, rotation sensors, and wind turbines, for example, all require magnets for operation. This tutorial describes how to build an Arduino based magnetometer that senses magnetic field using three Hall effect sensors. The magnetic field vector at a location is displayed on a small screen using isometric projection.
What is an Arduino?
An Arduino is a small open-source user-friendly microcontroller. It has digital input and output pins. It also has analog input pins, which are useful for reading input from sensors. Different Arduino models are available. This tutorial describes how to use either the Arduino Uno or the Arduino MKR1010. However other models can be used too.
https://www.instructables.com/id/Arduino-Magnetometer/










Aqui vai uma grande de coisas porreiras que podem fazer com tubo PVC, 56 delas diferentes, de tudo um pouco!







The 56 Most Brilliant PVC Hacks You’ve Ever Seen
Nick Gerhardt 
What can’t you do with PVC pipe? Here are 56 incredibly smart (and cheap!) ways to use this do-it-all material around your home and workshop. 
https://www.familyhandyman.com/diy-advice/the-most-brilliant-pvc-hacks-ever-seen/
















Se quizerem uma Gravadora Laser, aqui estão as melhores, e também a explicação do que elas fazem:





2019 Best Laser EngraversMax von Übel  
What's the best laser engraver? Check out our 2019 buyer's guide. Plus an introduction to laser engraving, services, and materials.
Home and office laser engraving have become so much easier these days. Once strictly used by industrial manufacturers, laser engraving is increasingly adopted by small businesses, product designers, makers, and even hobbyists.
In some cases, a laser engraver might prove to be the most advantageous manufacturing technology for your specific application.
Before pulling out your wallet, we have also compiled everything you need to know about laser engravers into a comprehensive guide to get you started in this great technology. 
https://all3dp.com/1/laser-engraver-engraving-machine/














E os mais acessáveis Impressoras 3D, MAS, estas, preciserão ser montadas, por vós, por isso, contem com umas horas às voltas nisso:








2019 Best Cheap DIY 3D Printer KitsAll3DP  
Do you want to build your own 3D printer with a low budget DIY 3D printer kit? Check out the best cheap DIY 3D printer kits you can buy right now.
Feeling brave enough to build a 3D printer from scratch? Assembling your own cheap DIY 3D printer kit is an attractive low-cost option if you’re on a tight budget.
It’s also a fantastic way to learn the nuts and bolts of how 3D printing works — quite literally. There’s no better way to understand the fundamentals of fused deposition modeling than by putting together your own machine. It’s highly satisfying, too. 
https://all3dp.com/1/best-cheap-diy-3d-printer-kit/















E mais uma longa lista, desta vez, 407 Máquinas Ferramentas de todo o tipo:




https://www.pinterest.pt/fernydiez10/máquinas/


















sábado, 8 de dezembro de 2018

Raspberry Pi 3, A+! E alojar as Impressoras, Mini-satélites(!), Lixar sem Stress, e o PVC sem Mestre

A placa Raspi não pára!
Agora um autêntico Computador, Quad-Coore de 64 bits, e o que mais,  a 1,4 GHz, vão ver à página deste Link as Especificações desta bela máquina!










Raspberry Pi 3 Model A+ Unboxing
e14phil

Introducing the Raspberry Pi 3 Model A+, the latest product in the Raspberry Pi 3 range.
Like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, and Bluetooth 4.2/BLE.
The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market.














...Algumas dicas que não são óbvias, e são mesmo essas as que nos tramam, quando não as sabemos...
Saibam então como fazer uma caixa para as vossas Impressoras 3D, que permita uma temperatura estável, sem abafar a máquina, e mais!
Dicas porreiras.






5 Tips for Building a 3D Printer Enclosure
3D Printing Nerd

While at Printed Solid, I spoke to David Randolph about 3d printer enclosures. They sell a number of enclosures, and even white label their enclosures for other resellers. Knowing I tried to build one myself with Bill Doran, I asked Dave to give me his five best tips for building one!













MINI-SATÉLITES!!!
Muháháhá!
Malta Estudante, e Super-Geeks, aprendam como construír estes bichinos, mas para durarem, que lançá-los, não é pela UPS, ou pelos Correios.
Ainda... LOL
Maravilha.




ArduSat-1 and ArduSat-X launched from the ISS Picture credit: NASA
Build a CubeSat Satellite that actually works, Part 1: Make it Resilient
Bill Marshall

It’s such a great idea: students in schools and colleges inspired to become the next generation of Space engineers by building and orbiting their own satellite. But it’s not a new idea. The first amateur satellite, OSCAR 1 was actually launched in 1961 as a secondary payload - only four years after Sputnik 1. Project OSCAR continued with more launches until 1969 when the Radio Amateur Satellite Corporation (AMSAT) was formed to co-ordinate further activity. The OSCARs are primarily amateur radio communication satellites built by students in educational establishments worldwide. Three were constructed at Surrey University in the UK starting with UoSAT-1 (OSCAR 9) in 1981 then UoSAT-2 (OSCAR 11) in 1984 and UoSAT-3 (OSCAR 14) in 1990. The educational purpose behind these satellites was highlighted when a special purpose radio receiver with software for the BBC Microcomputer became available. In the late 1990’s the CubeSat was born when it was realised that thanks to microelectronics it had become possible to squeeze most of the functionality of an OSCAR satellite into a 10cm cube. Since the first one made it into Low-Earth Orbit (LEO) in 2003, many more have followed. But the failure rate has been high for two reasons: the stresses of launch can ‘break’ the CubeSat before it even reaches orbit, and the Space environment is very hazardous for delicate electronics once orbit is achieved. What can be done to increase the likelihood of success?











Para não ficarem piores da Vista, nem dos Pulmões, não se lixem, ao lixar à máquina, e usem mas é esta Caixa protectora, que a saúde é essencial.
E também é essencial à paz de espírito, uma Garagem limpa, para terem de ouvir a querida Esposa a ralhar à brava...
LOL









Garage Dust/Sanding Enclosure
corbor4shore

INTRODUCTION:
I have a very small shop in my two car garage. Unfortunately I have to share that space with two cars. When I am sanding, routing or drilling, dust seems to coat every surface in my garage, including my wife car. I was tired of washing my wife’s car so I needed to find a solution to all the dust I was creating. I did some research and found some sanding downdraft tables, but I couldn’t imagine those working without an incredibly powerful vacuum (which I do not have), plus they do not contain the dust jettisoned out. I then started looking at bead blasting cabinets and found that I liked the containment aspect of the cabinet but I needed the downdraft capabilities of the sanding tables, so I decided to create a hybrid.

https://www.instructables.com/id/Garage-DustSanding-Enclosure/












Aprendam 5 lições duma assentada, sobre como usar o humilde, mas tão útil, Tubo de PVC para uma data de coisas boas, cortesia da nodda amiga, audreyobscura, que não pára de nos surpreender com a sua creatividade:




PVC CLASS
audreyobscura

Plastic PVC is most commonly used by plumbers and very clever DIY enthusiasts. This material and pipe were designed to transport water, as it cannot wear out over time like rusting metal can. PVC is also structurally very strong. When parts are constructed properly, it can support structures that are hundreds of pounds!
This class aims to go over the material properties of PVC as well as the most common ways it is worked, machined, joined, and finished. You'll be inspired to create furniture, agriculture projects, and more after learning these simple techniques to work with PVC.












quinta-feira, 24 de novembro de 2016

Uma Impressora 3D SLS! E Som do Plasma(!), uma Besta DIY, um Dado de LEDs, um Gerador Van der Graaf, e Esquadria para Juntas

Este jovem Engenghocas está de parabéns, fazendo este Projecto de 1ª, uma Impressora SLS que vai dar que falar...
Boa ideia!




JRLS 1000 DIY SLS-3D-PRINTERVulcaman 
In this Instructable I want to show you how to build a SLS 3D-Printer with a lot of features. I am an 18 years old guy from Germany who wants to understand how SLS-3D-Printers work in depth. I got the inspiration for this project after I saw a laser sintered object from a professionell SLS-machine. It was so detailed and so perfect. However a professionell SLS-machine is very expensive. So I designed, built and tested my own SLS-3D-Printer. It took me three month to develop the printer and I was quite surprised how well it worked. Now I will tell you some spects about the printer 
http://www.instructables.com/id/JRLS-1000-DIY-SLS-3D-PRINTER/











Isto não é para meninos, porque envolve ALTA VOLTAGEM, mas é um Porjecto do caneco, fazer dum Arco de Plasma, um Altifalante...
MUÁHÁHÁHÁ!




Advanced Plasma Arc Speaker

Proto G  
Yes, what you hear in that video is only coming from the scorching hot, high voltage plasma arc. It is vibrating the surrounding air similar to a regular speaker but it does so but sending electrons across the spark gap at the same frequency of the music. It's a great conversation starter to keep in your office!
Plasma speakers make amazing tweeters because they can reproduce high frequency sounds better than regular speakers due to the lack of a heavy diaphragm to move. From an audiophiles perspective, plasma tweeters are as good as it gets for high frequency sounds. For low frequency sounds, larger speakers perform much better. 












Tiro-ao-alvo para o Povo! 
Podem exercitar a pontaria, no Quintal, ou no Baldio, com uma Besta feita em PVC, em casa, sem barulheira, nem problemas legais, nem gastar muito. 
È bom.




DIY PVC survival compound crossbowthefrenchmaker  
For this survival ready contest, I will make a compound crossbow in PVC pipe.Why a crossbow? Because when I think to survival equipment present since the beginning of the series The Walking Dead, I see the Daryl's crossbow. And I find it really cool. Silent and precise it is also a good melee weapon if necessary.To make this crossbow, I will use common materials that can be found everywhere, and does not require any electric tools, except to save time, in order to stay in the survival mind.Ready? Watch out for the walkers!Warning! This is not a toy, be careful. Never aim directly at a person or animal.Only walkers. 
http://www.instructables.com/id/DIY-PVC-Survival-Compound-Crossbow/










Um Projecto que é divertido, e ao mesmo tempo, ensina a conceber e a fazer Circuitos Integrados compatíveis com o Arduino, é uma boa aposta para quem quer aprender...
Boa.






TinyDice: Professional PCBs at home

Emiliano Valencia  
What is the Tiny Dice?
Simply put, TinyDice is just an electronic, Arduino compatible LED die that looks quite neat.
In reality, this project was my attempt at doing things right; making an SMD circuit, a professional quality PCB, a good PCB design, and an effective code, that allows for a very energy efficient project (when not in use, the whole thing consumes less than 0.1 micro amps, yes, less than 1 ten-millionth of an amp!).
What will you learn here?
You will learn how to make high quality, SMD PCBs, from design to use, which consists in; Designing the board, transferring the design into copper clad, etching the copper clad, adding a soldermask, making a solder paste stencil, home reflow soldering, and programming a standalone board. Additionally, you will learn to use and program MSP430 value line microcontrollers from Texas instruments, these can be programmed like an Arduino, but they are very cheap and come in many shapes and sizes, an ideal tool for the average hacker to be able to use.
What will you obtain?
Appart from an incredible skill set, you will obtain a tiny gadget that displays your skills, plus it is a neat little piece of electronics to have and show around. On top of that, you will have a 6 sided die that will help you make decisions, and even win games )you could modify the code to make it be an unfair dice and use it at your favour).
This Instructable is on the Circuits contest, so if you consider it worth it, please vote for it! 











Um Gerador Van der Graaf, é algo de extremamente Geek, a ter em casa, como um Troféu, mesmo...
Por isso, sigam as Instrucções:



How to make a Van De Graaff generator

CCX191 
I've built this Van De Graaff generator for a science coursework and it works pretty well considering it being built in a rush (needa hit that deadline man). With it, I managed to achieve a 1.5cm spark, a happy physics teacher and full marks for my coursework :D. 
All the parts used are easy to find in shops and really cheap. Don't be too intimidated by the looks of it, its not that hard, improvising is key.
It's my first instructables so bear with me and I welcome any suggestions and comments.
All the best!- CCX  












Juntas de Esquadria perfeita, não importa o Ângulo, é o que este Instrumento vos facilita, duma maneira intantânea, poupando-vos tempo e dinheiro:





Angle Divider for Perfect Miters No 2

Phil B  
In January 2016 I did an Instructable on my copy of a Stanley No 30 Angle Divider. This is another version of the Stanley No 30 Angle Divider that looks a little more like the original from 1903. (Search your favorite browser for Stanley No 30 Angle Divider to see images of the original version with a wooden handle.)
But, the chief advantage of this Instructable is a jig for drilling the center pivot hole in the body. That jig makes dead on accuracy almost foolproof. However, this version is also more work with more steps. But, some shortcuts could be taken for those who do not have access to a welder or want to avoid the extra work.
The photo shows this version of the Angle Divider in use to set a power miter saw. The other member of the miter would be set and cut by turning the Angle Divider 180 degrees and adjusting the saw to the other half of the fence. The fence on this saw had a wavy profile. I needed to catch more of the blade because I was cutting some tall baseboard molding, so I added 3/4 inch plywood to the face of the fence. That brought the work out toward the operator and caught more blade. It also gave a flat top surface for the Angle Divider, which resulted in easier and more accurate setting of the saw 






segunda-feira, 1 de agosto de 2016

Uma Impressora 3D com Tubo em PVC? E Uma Barraca prás Ferramentas, um Compressor de alta capacidade, a Oficina de Electrónica perfeita, e amolar cafas

Encontrei esta lista de 50(!) Projectos para fazer com Tubo de PVC, e não é que a primeira, é um Engenho de furar?
Ora, penso eu, isto irá inspirar algum Engenhocas a fazer uma estrutura para uma Imprssora 3D, ou  uma Fresa CNC...
Mas se  não, está aqui uma lista de engenhocas para fazerem, desde uma cama para o Gato, até a um Drone submersível, passando por um gerador de Iões negativos, para melhorarem a qualidade do Ar...




50 Things to Make with PVC Pipe

xxlauraxx
Here are 50 projects that'll inspire you to pick up some PVC pipe and get making.
You'll find everything from practical creations, like a drill press and baby gate, to more fanciful projects, like a net gun, dunk tank, and paintball mine.
Whether you're new to working with PVC or you use it all the time, trevormates' PVC 101 is worth checking out before starting your next build. 











É preciso arrumar todas aquelas Ferramentas, e não há espaço, em casa?
Vai tudo prá Barraca, e aqui seguem as instrucções para construírem uma:





How To Build a Shed

darbinorvar 
A shed is great addition to any property. This small garden shed measures 3 x 6 feet (a little less than 1 x 2 meters) so it's great to build if you don't have a lot of space, plus with some smart organization it can fit a lot of things! 








E se precisam de Ar Comprimido, e muito dele, mas sem a Barulheira, têem este Instructable, e ainda por cima, fazem-no usamdo um Comptressor reciclado, isto é, sucateado, dum Frigorífico!






D.I.Y Ultra Quiet Shop compressor from a refrigerator motor (compressor)

botzendesign  
I needed to build a very quiet, higher capacity compressor for my Industrial Design Studio shop, since the one I have is quite loud and does not have the capacity that I was comfortable with for my urethane casting work.
In this Instructable I show you how to build a light duty compressor from parts you can buy on Ebay and or your local hardware store, Home Depot, Lowes, Menards, or a scrap yard, using a refrigerator (fridge) motor compressor. This is not for using heavy power tools or spray painting a car. It's for blowing off parts, maybe airbrushing if you add an air/oil dryer to it or just need some air in your shop for various projects. Add your own optional Motörhead badges too. See the Video below for full details. It's a great companion to this Instructable tutorial.











...E se, por alguma razão, se vão meter na Electrónica, porque não, terem a Oficina de Electrónica perfeita?
Façam assim: 







Setting Up the Perfect Electronics Workplace
bjkayani 
DIY is in my blood and for about 6 years now i have been doing such work. I have a keen interest in electronics work, prototyping, reusing and building. Working is only fun and calming if you have a good workplace with all you will need at arms length. My workplace is build by myself, improved over the years. I am going to share with you my workplace i use for most of my electronics, robotics and hobby work. I hope you will find some of these ideas inspiring for setting up your workplace.













Se se envolveram na Cutelaria, ou precisam de afiar ferramentas de corte, ou lá o que seja que envolva amolar metal, este nosso amigo fez a sua própria Ferramenta de Bancada, e moatra-nos como o fazer, também:








Low Budget Knife-maker's Bench Grinder
antagonizer
 
I've been knife-making for quite a few years, and have always relied on a 1"x24" belt grinder, as well as my 4"x36" bench sander to get the job done. For the longest time, I've wanted to invest in a 2" belt grinder, to make the process easier, but could never justify the massive expense that goes into one. That's when I decided to build one for myself.  








quinta-feira, 23 de julho de 2015

RoboSavy, para todos, Bambu PVC, e um fantástico Projector 3D!!!

Dica da GrabCad, e mais uma razão para lá se inscreverem, eis o RoboSavvy, simpático Robot, da Autoria de Joshua Chung, que todos podem ter em casa, porque podem fazer o Download Grátis, e Imprimir nas vossas Impressoras 3D:




RoboSavvy Humanoid Design - unl

Joshua Chung

This robot is called "unl", which provides unlimited possibilities in the humanoid robot design. For a long time that I had a thought that there might be a way to make the same humanoid robot both for home and games. At home, it can be cute, attractive, and playable. But on the game field, it needs special weapons, reduced armor weight, and enlarged range of motion for kicking, punch, and fight. This "unl" kind of integrated two into one. The armor is changeable. It even has two faces for the robot hobbyists and RoboCup champions. I hope you enjoy it and let me know if there is any question or suggestion.










Eis mais uma coisa para fazer dos Tubos em PVC, disfarçá-los de Bambu. para Montras, Jardins, Teatro e Cimema Amador, etc.




Making Faux PVC Bamboo
Chuck Stephens
 
I love it when a project comes together! I got the idea for this project about four hours ago and now I'm posting it.
It all started with zaphodd42's Make PVC Look Like Wood instructable. I use PVC in a lot of projects and I'd never thought of using this approach. I was reading the comments and someone asked about simulating bamboo in PVC. My friend and partner in the local maker scene Instructomaker suggested using a heat gun to soften the PVC and compressing the two sides to make it flare out. Hmmm..
 









Isto dá novas energias a um velho Inventor...
Um Projector 3D, que vocês fazem em 10 MINUTOS, e montam encima dos vossos Smartphones!
Fantástico!



  
Amazing 3D Projection Pyramid in 10 min from Clear Plastic Sheet ! 
mikroGanesh 

You will be amazed at the simplicity of this mechanism and its practicality
Use your smartphone to project 3D holographic images and videos without any modification or 3D goggles
Be mystified by images and videos popping over your smartphone!!
All this from a piece of clear plastic sheet 

 






terça-feira, 14 de julho de 2015

Novo Material para Imprimir! E Fitas LED coloridas, uma Fornalha para Metal, PVC parecendo Madeira, e Sepcific Love

Para quem tem uma Impressora Cube, pode agora imprimir toda a espécie de formas com este novo Material, lavável, que funciona como Suporte:




Infinity™ Rinse-Away Support
Printing with complexity has never been easier. Break beyond the boundaries set by unachievable overhangs and the laws of gravity, and enter the possibilities of intricate patterns, degrees of freedom and suspension in space.








A Pololu oferece-vos agora estas Fitas LED coloridas, que podem mudar de cor, individualmente, para uma infinidade de usos possíveis, eis só um de muitos exemplos:





Addressable RGB 30-LED Strip, 5V, 1m (APA102C)
This LED strip has a length of 1 m and contains 30 RGB LEDs that can be individually addressed using an easy-to-control SPI interface, allowing you full control over the color of each RGB LED. The flexible, waterproof strip runs on 5 V and can be chained with additional APA102C strips to form longer runs or cut apart between each LED for shorter sections.








FORNALHAS DE METAL!
Aparecem cá muito, e é sobretudo porque, com uma destas, fazem-se em horas, projectos que levam dias a fazer, maquinando Metal... 

E porque derreter Metal é BACANO. 

Esta tem a vantagem de re-aproveitar uma Botija de Cerveja, e duma forma que é muito engenhosa , de tal maneiram que parece se feita de propósito para isto!






Beer Keg Metal Melting Furnace

Random_Canadian


So there is a long list of instructions on building a metal melting furnace. But I have decided to show you my process anyway.

I have turned an old beer keg into a portable metal melting furnace, This will cover both the furnace and the propane torch burner. I being in Canada relay heavily on Canadian Tire store and online product availability.

The metals were acquired locally at a metal recycler and the chems were from a not so local chem supplier, OH and the melting material from a previous employer 







Para o caso de precisadem de decorar os vossos Projectos PVC, de forma a parecerem Madeira, criarem Modelos à escala, reconstituições Históricas, Montras malucas, e etc, cá vai, como fazerem o PVC pareder Madeira!




Make PVC Look Like Wood
zaphodd42 

I came up with this simple trick to give PVC pipe a realistic wood texture when I built a few plastic didgeridoos a couple of years ago. It would also work for theater, home decor or backyard tiki-bars! Send an invite if you build that last one. 









E para o fim, este simpático Projecto de coisas simples para a Família, e mesmo toda a Malta, fazer em casa, o Specific Love:





Welcome to SpecificLove
We are a community of How-to, and Homemade creativity. We hope you can get inspired to make new projects.