Levitação! E fotos, impressas em 3D, melhorar Impressoras baratuchas, um Porta-chaves bacano, e pintar os Objectos 3D

Sim, podem fazer pequenos objectos flutuar, devido à Acústica!

Ora aqui está uma frase que se não ouve todos os dias... 

Extraordinário! 

E este modelo é uma versão improvisada:

Acoustic Levitator Case
Jakub_Nagy

Acoustic levitator from Asier Marzo is a very popular thing here on instructables. I build it, it was working but I noticed couple of issues. For example:

1.  The 3D printed space between bowls is a bit fragile.
2.  The levitator can't stand on its own because of its curvature.
3.  All the electronics are fragile and a bit ugly.
4. So I built this case. It does couple of things like:
5.  Serves as a stand.
6.  Hides all the electronics.
7.  Iluminates levitated objects.
8.  Changes the voltage going into driver which is important when levitating liquids.
9.  Shows input and output voltage.

If you look at the second image you can notice that many changes have been made to the original model.

https://www.instructables.com/id/Acoustic-Levitator-Case/

Uma maneira rápida de imprimir um Presente original, mesmo, são estes Candeeiros 3D, que mostram uma Foto a preto-e-branco...

Não se arranja disto em outro lado!

Lithophane Lamp : 3D PRINTING YOUR PHOTOS!
geekrex

Every time there's an event of any kind where I need to buy a gift, I always prefer to make something then just buying. But the question always is how can I gift them some unique as well lovable.
Since I have a 3D printer, I always think that the best gift would be something personalized that I would 3D print, something that cannot be bought elsewhere and something that would make me proud to show off my printer's creations! And also, I wouldn't have to keep worrying about finding a good gift idea!
The most personalized item I could 3D print was a lithophane! so I turned it into a Customised Lamp

https://www.instructables.com/id/Lithophane-Lamp-3D-PRINTING-YOUR-PHOTOS/

 

Este Instructable, diz-me muito, porque comprei uma Delta que é uma bodega!

Partes impressas a 3D, extrusor da tanga, peças de 3ª qualidade...

Vou aproveitar para, aos poucos, a transformar nalguma coisa de jeito:

 

  

Cheap 3D Delta Printer Improvements
ehsmaes

This instructable will show you som much needed improvements required to get good results out of a cheap 3D printer of delta type.
I had been curious of 3D printing for a while. I did the usual research and found that what most people recommend for beginners seeking to dip their toes into 3D-printing is carthesian style printers. Thinking that this advice can't possibly apply to me, I obviously decided on a delta. Big mistake! But not on all accounts. I have gained a lot of knowledge in my efforts to get the !#%¤&¤ thing working (at least I like to think so because it makes me feel better). I came to realize that I hadn't purchased a gadget. I purchased a hobby fully capable of sucking up most of my free time.
The printer in question is the Geeetech G2S Pro. This is my first and only 3D printer so I can't really say how it stands up to the competition. I will say though, that my instance of this product was of sub standard quality. The few prints I managed to produce in the beginning were of very poor quality and printing dual-color simply didn't work.
Do you have the same printer and problems or maybe a different delta with similar problems? Don't give up! With some alterations you can actually get really good results! Keep reading.

https://www.instructables.com/id/Cheap-3D-Delta-Printer-Improvements/

Mais algo útil, para calar Familiares e Namoradas que acham que uma Impressora 3D "é um Brinquedo", eis um Porta-chaves que é mesmo BACANO!
5 em 1, não é nada mau!

Keytool - 5 Tools in Your Pocket!
Lucasd136

The Keytool is a 5 keyholder with 5 everyday tools for everyone!
I know, ''another keyholder?'' stick with me, this one is more than meets the eye.
Check out the video above to see the 5 uses of the keytool!
The keytool:
 Holds your keys so no more looking for the right one
 Holds an USB so you always carry your data with you
 Has a small ruler for the quick measurements
 Is usable a a docking device for your phone so you can see all your incoming messages or watch your videos!
 Has a beer opener because we all need to crack open a cold one with the boys
 Is 3D printable in only 1 hour!

https://www.instructables.com/id/Keytool-5-Tools-in-Your-Pocket/

E como é chato como a Potassa, imprimir sempre Objectos monocromáticos, que é o mesmo que dizer, só uma cor, eis como os  pintar, mas duma maneira impressionante.
É bom.

Learn How to Paint Your 3D Prints Like a Pro!

Learning to paint your 3D printed parts will enable you to create looks-like prototypes, detailed miniatures, and a variety of other visually accurate models. Navigating the various different materials and techniques can be intimidating, and in this post you’ll learn all of the steps needed to paint your parts from start to finish.

Printing
Starting with a detailed and well-printed model will make the rest of the painting process easier and improve your final results. Resin printers like the Formlabs Form 2 are best for painted parts, both because of the high resolution and the ability to use some paints directly on the printed surface.

https://pinshape.com/blog/4-easy-steps-to-painting-3d-prints/

Contactar Fabricantes? E dobrar tubo, como se faz, Popular Mechanics em Espanhol, Mecanismos fascinantes, e um sem-fim de ideias na Pinterest.

Se quizerem pagar por isso, podem ter uma boa lista de Emails de Executivos de Empresas Fabricantes.

Sem serem barrados pelos Idiotas de Serviço que tantas Empresas empestam... 

Mais um serviço do Site de peças para tudo, o EZSelect:

NEW: Direct Email Addresses for Manufacturing Executives

Introducing... Direct Email Addresses for Manufacturing Executives, available with the NEW Premium version of EZ Select, the industrial database for prospecting, sales, marketing, business development, and research.
Our team has been hard at work researching a BRAND NEW data field in our database... direct executive email address.


Direct executive email addresses are a new addition to the database and already available for more than half of all executives.
Subscribing to the Premium version of EZ Select unlocks direct executive emails, making them visible on screen and FULLY EXPORTABLE.
Use of direct executive emails is subject to additional licensing provisions and restrictions. Read the Premium License Supplement for full details.
Log into EZ Select at https://www.ezselect.com and visit the 'MANAGE DATABASES' page to subscribe instantly.
NOTE: The Basic and Standard (formerly "Full") versions of EZ Select will continue to include main company email address (e.g. info@, sales@, etc.) at no additional cost.
Please contact us with any questions.

https://www.ezselect.com

Compraram uma máquina de dobrar tubo, e não sabem o que significa aquilo tem estrito, nem como dobrar tubo tuma maneira bem certinha?
Eis o que precisam de saber...

Using a Hand Tube Bender

Swagelok® hand tube benders provide consistent, high‑quality bends in tubing made from most materials used with Swagelok tube fittings. Watch this video to learn how to use one.

https://www.youtube.com/watch?v=Eo95bjm7WFM

Popular Mechanics. Uma bela colecção de revistas que muito vos podem ajudar, e como nem todos sabem Inglês...
Cá vai em Espanhol, e por exemplo, aqui está como trabalhar Tubos de PVC:





 

COMO TRABAJAR CON TUBOS PLASTICOS FEBRERO 1979

ROLO2008

Cuando se introdujo el tubo de cloru­ro de polivinilo clorinado (CPVC), las instalaciones caseras de plomería se facilitaron notablemente, aunque el nuevo producto no ofrecía ningún tipo de sistema, Ahora, con el advenimien­to del tubo flexible de polibutileno (PB), los plomeros disponen de nuevo de las conveniencias de que disfruta­ban con el tubo de cobre, aunque a un costo menor y con mucho menos es­fuerzo. El CPVC sirve como tubo rígi­do y el PB como tubo termoplástico flexible. Cuando un tipo no resulta pa­ra una aplicación en particular, el otro se puede utilizar.

http://www.eltallerderolando.com/2015/03/23/herramienta-radial-de-gran-utilidad-compas-enero-1955/herramienta-radial-de-gran-utilidad-enero-1955-003-copia/

Para o Relax, cá vão estes AnimGifs de mecanismos fascinantes, alguns, até úteis...

LOL

GIFs of Processes — Watch timing mechanism
Mike Davis

https://www.pinterest.pt/pin/412853490835066272/?e_t=63e61113a5044d4083b55628cfaee8b3&news_id=4955910595560881983

Mas ESTA Página, é só coisas bem úteis, mecanismos com Instrucções de Máquinas que fazem mesmo falta fazer em casa, ou mesmo só para as compreender.

Maravilha

https://www.pinterest.pt/pin/238057530287430734/

Scan 3D & CAT! E a LAN Party, LED&MAT, erros de Impressão, e rodas e rodízios

Que tal, fazerem em casa, com um Arduino, uma Engenhoca que fazx, não só Scan 3D, mas também CAT de Luz visvel? 

Já imaginarama quantidade de coisas que podem fazer com isso?

Como um Modelo 3D com partes translúcidas!

Uma fenomenal ideia deste nosso amigo, que nos faz ganhar o dia, com a noção que há coisas boas, neste Mundo, todos os dias.

Obrigado, jbumstead.

Desktop CT and 3D Scanner With Arduino

jbumstead

Computed tomography (CT) or computed axial tomography (CAT) is most often associated with imaging the body because it enables clinicians to see the anatomical structure inside the patient without having to do any surgery. To image inside the human body, a CT scanner requires X-rays because the radiation has to be able to penetrate through the body. If the object is semi-transparent, it is actually possible to conduct CT scanning using visible light! The technique is called optical CT, which is different than the more popular optical imaging technique known as optical coherence tomography.
To acquire 3D scans of semi-transparent objects, I constructed an optical CT scanner using an Arduino Nano and Nikon dSLR. Halfway through the project, I realized that photogrammetry, another 3D scanning technique, requires much of the same hardware as an optical CT scanner. In this instructable, I will go over the system I constructed that is capable of CT scanning and photogrammetry. After acquiring images, I have steps on using PhotoScan or Matlab for computing 3D reconstructions.

http://www.instructables.com/id/Desktop-CT-and-3D-Scanner-With-Arduino/

Decorre dias 23 e 24 deste Mês, a Lan Party em Ourém, com uma data de actividades, aproveitem, e vão lá, que também ajudam os Animais, com o Bilhete de entrada:

Lan Party Robótica

Escola Profissional de Ourém

É já no próximo dia 23 e 24 de março, sexta e sábado, que os alunos do curso de Informática e Eletrónica da Escola Profissional de Ourém organizam um evento onde poderás mostrar as tuas skills de gamer e robótica!

https://epo.pt/lr/

Uma Ferramenta à vossa disposição, para verificarem como se portará o vosso Produto na Vida real, é este Laboratório do Instituto Pedro Nunes, onde toda a espécie de testes se execem sobre as vossas Engenhocas e o que mais, obtendo-se assim um nível de qualidade que não engana, e evitando uma série de dores-de-cabeça Pós-Producção:

LED&MAT

Laboratory for Wear, Testing & Materials

At LED&MAT (Laboratory for Wear, Testing & Materials) we develop R&D activities and technology transfer to enterprises in the field of materials and fabrication processes, surface modification, energy efficiency and fabrication by innovative technologies. We also perform a multiplicity of tests for the characterisation of physical, chemical, mechanical and tribological properties on multiple types of materials. We wish to contribute to the perfect symbiosis between fundamental research and industrial application.

What we do
We develop ideas from their genesis to their application in real situations that are related to problems with materials and processing technologies proposed by our customers, R&D institutions and companies which deserve our special attention. Our actions begin at conception, going through research and development to the prototype and final application. Throughout the process we use methods of product development, generating products and innovative processes, improving production efficiency and providing tailored solutions to meet the needs of our customers.

https://www.ipn.pt/laboratorio/LEDMAT

Por falar em dores-de-cabeça, e desgostos variados, eis mais uma achega para evitarem os erros de Impressão 3D mais comuns, as 3 maiores misérias da Impressão 3D:

3 Most Common 3D Printer Errors and Their Fixes

Features like Formlabs’ one-click print exist for professional machines, but hobbyist printers often require a bit more tweaking and troubleshooting. In this post, you’ll learn about the most common problems you’re bound to run into as a maker and discover their fixes.

https://pinshape.com/blog/3-most-common-3d-printer-errors-and-fixes/

Parte duma Invenção minha, que vocês vão apreciar quase todos os dias, são estas Rodas, e não só, que se podem encontrar nos catálogos bacanos que vêem neste link abaixo...
Rodas, escadotes, automatismos e ferragens para portas, etc.

A RODALGÉS

O nosso core business são as Rodas e Rodízios, para todo o tipo de aplicações, com soluções profissionais GAYNER e BLICKLE, dispondo de mais de 30.000 soluções standard.
Presente no mercado nacional desde 1998, a RODALGÉS é a representante oficial das marcas GAYNER e BLICKLE, conceituadas empresas multinacionais, fornecendo soluções profissionais para armazéns, unidades fabris e centros de distribuição comercializando equipamentos para movimentação, elevação e transporte de cargas.
Dispomos de uma gama variada de Handling & Warehouse Equipment para a manutenção operacional e logística in-house, contribuindo para a maior eficiência dos equipamentos e melhoria de processos, para uma qualidade sem falhas e para o aumento da produtividade.

http://www.rodalges.pt/pt/produtos/

Máquinas-Ferramenta feitas em casa! Em Madeira, Aço, e até um Torno CNC! Mais um Robô vencedor, e Iron CAD

Podem fazer todo o Ferramental em vossas casa, com este canal do Youtube, que parte do princípio simples de que a estrutura das ditas Máquinas-Ferramentas pode ser feita em Contraplacado, em várias camdadas...

E muita Engenhosidade!

Boa iniciativa.
Eis, por exemplo, uma Lixadora de Fita:

 

Making a Homemade Belt Sander - El yapımı Şerit Zımpara Makinası

Gökmen ALTUNTAŞ

Building a homemade belt sander, powered by a drill. Simple, cheap and usefull. it's made of plywood. You can find all the measurements at the end of the video. Kontrplaktan yaptığım şerit zımpara makinası. Basit ucuz ve kullanışlı. Tüm ölçülerini videonun sonunda bulabilirsiniz.

https://www.youtube.com/watch?v=sFEHNxirqOs&list=PL7c2ysQbjIBYmEDpFPlqXyyGs8MqDOWg

Mas podem também fazer um Torno, com Tubo de Aço, e pouco mais, para trabalhar Plástico e Metais macios...

https://www.youtube.com/watch?time_continue=18&v=RK4gmRmuQJ8

Homemade mini lathe
Homemade lathe machine

My homemade mini lathe for processing small parts of plastic and soft metals.

https://www.youtube.com/watch?time_continue=18&v=RK4gmRmuQJ8

...E ATÉ UM TORNO CNC!

CNC mini lathe - DIY design and build project from scratch! Part 1

Behrouz Parsee

 Decided my next project is to build an awesome CNC mini lathe, super compact and super accurate is the plan! This video shows my preliminary design and goes through all my thoughts on the engineering behind it.

 

https://www.youtube.com/watch?v=5gTC4Xk_3Cg

Eis este Robot, um Vencedor, deste nosso amigo Lusófono, IgorF2, que venceu uma data de Prémios, por boa razão, é excelente.

E vocês podem fazê-lo em casa, também.

Joy Robot (Robô Da Alegria) - Open Source 3D Printed, Arduino Powered Robot!
IgorF2

First Prize in the Instructables Wheels Contest, Second Prize in the Instructables Arduino Contest, and Runner up in the Design for Kids Challenge. Thanks to everyone who voted on us!!!
Robots are getting everywhere. From industrial applications to underwater and space exploration. But my favorite ones are those used for fun and entertainement! In this project a DIY robot was designed to be used for entertainment in children's hospitals, bringing some fun to the kids. The project is focused in sharing knowledge and promoting technological innovation to assist NGOs that carry out charitable work in children's hospitals.
This instructable shows how to design a remotely operated humanoid robot, controlled over a Wi-Fi network, using an Arduino Uno connected to an ESP8266 Wi-Fi module. It uses some servomotors form head amd arms movements, some DC motors for moving small distances, and a face made of LED matrices. The robot can be controlled from an ordinary internet browser, using a HTML designed interface. An Android smartphone is used to broadcast video and audio from the robot to operator's control interface.

https://www.instructables.com/id/Joy-Robot-Rob%C3%B4-Da-Alegria-Open-Source-3D-Printed-A/

30 dias de teste, montar os vossos Conceitos, como se fosse Lego, com partes já existentes no Mercado!

IronCAD, em vários diferentes programas, permite-vos ser sérios, nos vossos Designs, com a inclusão de peças existentes no Mercado, optimizando, economizando, e convencendo:

IronCAD Mechanical
A Powerful CAD Parts Catalog for Fabricators

Library of Standard Components
IronCAD Mechanical is an IRONCAD catalog that includes pre-made designs for industry-standard fasteners, bearings, O-rings, piping, and flanges, saving fabricators hours of design time. Just drag and drop these readymade designs into assemblies, where they will attach themselves to other parts thanks to IRONCAD’s built-in intelligent behavior.

www.ironcad.com/design-extensions/ironcad-mechanical/

... E para rirem um pouco, eis o que um Engenhocas diz sobre a sua Impressora 3D, quando está cansado, frustrado, e farto de regulações, afinações e mais frustrações:

Adventures in 3D printing

EdgarInventor 

 The sufferings of just another geek trying to bleed a print from a cheapo printer.

 https://www.youtube.com/watch?v=iTlfX8ckugk

 

Oficina de primeira! E Youmagine, uma Airsoft feita por 3D, um Barraco para a tralha, e um Microscópio do Smartphone!

Com isto, qualquer cantinho se qualifica como uma Oficina!

Com uma estação de re-carregamento, mais espaço para malas, com um modelo Sketchup, é de aproveitar:

DIY Power Tool Storage W/ Charging Station
SEB TECH DIY

Let's build this awesome power tool wall storage system. I had to organize my power tools in my shop, and decided to design and build this wall storage unit. This woodworking project is pretty simple to make, all made from plywood and 1 piece of pegboard. You can also add some stain and varnish for a final touch. I used imperial unit for this build but you can find all the metric dimensions below. Also, i added for FREE my SketchUp model, feel free to download it and modify it to yours needs. Happy Building ! :)

https://www.instructables.com/id/DIY-Power-Tool-Storage-W-Charging-Station/

Para além do Thinghiverse, há agora o Youmagine, diferente, por ser mais centrado na Open Source, duma maneira mais adaptável à modificação ao gosto de cada um:
 

YouMagine: share, remix and 3D print.

Browse through over 10.000 designs that are ready to print.
YouMagine is an online community of 3D printing enthusiasts who wish to work together to share, remix and make better 3D printed things. YouMagine facilitates this community, empowers and gives you the tools you need in order to improve, invent & make.
Uniquely YouMagine is primarily a vehicle for supporting open source creation and wants to be a force multiplier for the entire 3D printing community. Uniquely we are focused on building the entire end to end open source software toolchain to make things malleable.

https://www.youmagine.com/

Quem não quer fazer um Brinquedo como os da Toys R us, com a Impressora 3D?

Eis aqui uma espingarda Airsoft que podem fazer em casa.

Atenção, dispara bolinhas de plástico, accionada por molas, e NÃO é uma arma,  nem pretende ser, mas um simples brinquedo, que nem fura copos de plástico...

Mas um brinquedo, muito divetido!

3D Printable Airsoft Gun
Engineer777

PURPOSE
When 3D printers started to dramatically drop in price and were thrust onto the commercial market, I was immediately hooked. This is every engineer's dream come true! The storm of cool printable products really hasn't developed as I expected however. Most people were, and still are, only printing little sculptures and vases. In terms of pushing this technology to its potential, we're not off to a great start! I came to the conclusion that it is not a lack of vision that is limiting the use of these desktop printers, but a lack of designs. People would print more awesome things if there were more awesome things to print. So I put two and two together and started designing this printable airsoft gun. It's the start of many designs I hope to produce for people who really want more than just a vase from their printers. I hope it will inspire you to get your creative mind in gear and contribute some awesome designs for a 3D printable future!

www.instructables.com/id/3D-Printable-Airsoft-Gun/

Build Your Own Storage Shed!
NathanaelScheffler

Hello Instructables! This is my entry into the Shopbot Contest. This Instructable will show you the steps to building your own shed. We decided that our shed would be for storage because we wanted to get some stuff out of the garage so we can use it as a shop. One of the challenges of building a shed in our backyard was that the ground was sloped in the area that we wanted to put it, so we had to find a way to get around that. Another was that we are building beside some well established trees, and we didn't want to harm their root structure. This is why we went with cinderblock and mortar rather than poured concrete.

https://www.instructables.com/id/Build-Your-Own-Storage-Shed/

Isto, não é uma Engehnoca engraçada, mas sim, um projecto de grande mérito, para auxiliar a várias necessidades em Trabalho de Campo, fora dos Laboratórios, com uma adaptação para os vossos Smartphones, que vos permite ter um Microscópio à mão, em todo o lado.

Porreiro.

Open Source 3D Printed Clip-On Microscope For Smartphones

Anne Freier

This is an open source design for a smartphone camera microscope which can be customized, downloaded and 3D printed.
A team of researchers at RMIT University in Australia have developed a 3D printable clip-on microscope for smartphones. The design of the microscope has been shared on the Centre for Nanoscale BioPhotonics website.
Led by Anthony Orth, a research officer at the centre at RMIT University, the device has been developed to allow anyone, from students to medical staff to people at home, to take a closer look at things invisible to the naked eye.
The solution also means that the microscope can be used in situations where laboratory equipment may not be available. This could be hugely beneficial for application in less developed countries to help detect malaria or other blood borne parasites.
Orth explains in a post for The Conversation:
“What we’re hoping is that our design, or something like it, gets used for ultra simple, cheap and robust mobile phone based devices – be it for medical diagnostics in underserved areas such as the remote Australian outback and central Africa, or monitoring microorganism populations in local water sources.”
The researchers are also hoping that the final design can be optimized further to suit different people’s needs.

https://all3dp.com/open-source-3d-printed-clip-microscope-smartphones/

-

Grafter! E um Gerador por 30$, Motedis, uma Dobradeira, e ChinaFacture! YEAH!

Já pensaram fazer Maquinetas, ou apenas, Impressões multi-coloridas, mas as peças não encaixam?

Grrr!

Problema resolvido com este Software bacano, que trata de que as coisas funcionem, porque podem  mexer, virtualmente, nos mecanismos, e aferir quais são os que encaixam melhor.

Categoria.

 

Grafter Software Remixes and Improves 3D Printing Models into New Forms
Anne Freier

Grafter can remix 3D printing models into new, functional machines, without the need for extensive tweaking or testing.
Remixing 3D models to create newly printed objects is a common technique in additive manufacturing. A team of experts at the Hasso Plattner Institute in Potsdam, Germany have gone a step further, by developing software to remix 3D printed machines with moving parts.
When remixing, creators often combine parts from parent models with those of a different model. However, this can lead to poorly fitted parts as models often do not match each other.
Grafter, the software developed by Thijs Jan Roumen, Willi Mueller and Patrick Baudisch at the Hasso Plattner Institute addresses these issues.
It does so by fully automating the entire remixing process – from extraction and recombination of the separate 3D printed elements.
However, it also enables the user to see which mechanical elements would fit and work best together.
This saves users the effort in having to re-engineer and tweak or even test the original mechanisms before combining them.

https://all3dp.com/grafter-software-remixes-improves-3d-printing-models-new-forms/

Vento, não falta!

Por isso eis como podem fazer o vosso Gerador Eólico, por cerca de 30 Dólares, e tudo bem explicadinho, num vídeo que não necessita de legendas, por isso, serve para qualquer Geek no mundo:

 

$30 DIY Kilowatt Wind Turbine - Build Tutorial v1.2
OpenSourceLowTech.org

Full construction tutorial text and resources at: http://solarflower.org/tutorial.php?l... Facebook discussion group: https://www.facebook.com/groups/windt... This is the up to date build process for the OpenSourceLowTech.org $30 Lenz2 vertical axis wind turbine. The turbine can be made almost entirely from recycled materials with basic tools in six hours for $20-35. It is tested at 35-40% mechanically efficient, generates 130 watts mechanical in a 30 km/h wind, 1 kilowatt at 60 km/h, and can survive 100 km/h gusts.

https://www.youtube.com/watch?v=t9TrUPoevXI

Motedis!

Isto entusiasma qualquer Geek que se preze: 

Uma loja online com Perfis, peças, e componentes, sim, podem fazer a vossa própria Impressora 3D, mas muito mais...

E a preços MUITO em conta.

Vão lá.

Motedis

A robot bringing you the perfect range of matching construction components: this is Motedis.
No matter how ambitious your project is: from a model railway to industrial structures, you can find anything you need in our online shop. Our broad selection of products includes high quality and versatile aluminium profiles, profile accessories, mechanical components, drive components and 3D printing materials.
Having a robot as a supplier has considerable advantages. We fully automated the purchase process in our online customer interface and cut off unnecessary services to be able to offer you very competitive prices – for big orders as well as for small orders. In this way, industry standard products are available to anyone who is able to deal with a robot of few words. Our customers don’t require product applications assistance as they already know exactly what they need and how to use it to make their ideas come true.
https://www.motedis.com/shop/

Dobrar chapa metálica, como deve de ser, dá-vos a possibiliade de constuír de tudo um pouco...

Por isso, vejam como é com este nosso amigo, que para além disso, vos ensina muitas mais coisas, tem um sem-fim de Links bacanos!

Dobradeira Manual - Faça Você Mesmo (Repostado) Sheet Metal Folding Machine
Oficina Garagem

Tudo bem Família Oficina Garagem?
Nesse vídeo você vai aprender a fazer a sua dobradeira de chapa para dobrar chapa de até 50 centímetros de comprimento.
Aprenda nesse passo a passo bem detalhado que você vai economizar um bom dinheiro, você vai poder dobrar chapas para reparos de funilaria, pequenos trabalhos de serralheria e dobrar diversa chapas usadas em trabalhos hobby.
Se você gostou e ainda não é inscrito não perca tempo e se inscreva que vem muito vídeo bom por ai.

https://www.youtube.com/watch?v=hWmWysOWdMc

Não há nada como um dia, como ver as vossas ideias no Mercado

Mas como?

Eis como, mandem fazer na China, se não conseguirem encontrar quem o queira fazer, na vossa terra. 

Dica duns gandas bacanos, do Movimento Maker Portugal, e estejam à vontade, que lá estão também dois Portugas, o que é uma garantia de Universalidade, damo-nos bem, e entendemo-nos com toda a gente...

 

 

TRANSFORMING YOUR IDEAS INTO REAL PRODUCTS

China Facture's mission is not to be a middle man, or a factory, or a consulting company. We want you to feel China Facture as a member of your team, like one person that is responsible for finding suppliers, manufacturing and getting all the logistics going in China

http://chinafacture.com/#services