Máquinas-Ferramenta feitas em casa! Em Madeira, Aço, e até um Torno CNC! Mais um Robô vencedor, e Iron CAD

Podem fazer todo o Ferramental em vossas casa, com este canal do Youtube, que parte do princípio simples de que a estrutura das ditas Máquinas-Ferramentas pode ser feita em Contraplacado, em várias camdadas...

E muita Engenhosidade!

Boa iniciativa.
Eis, por exemplo, uma Lixadora de Fita:

 

Making a Homemade Belt Sander - El yapımı Şerit Zımpara Makinası

Gökmen ALTUNTAŞ

Building a homemade belt sander, powered by a drill. Simple, cheap and usefull. it's made of plywood. You can find all the measurements at the end of the video. Kontrplaktan yaptığım şerit zımpara makinası. Basit ucuz ve kullanışlı. Tüm ölçülerini videonun sonunda bulabilirsiniz.

https://www.youtube.com/watch?v=sFEHNxirqOs&list=PL7c2ysQbjIBYmEDpFPlqXyyGs8MqDOWg

Mas podem também fazer um Torno, com Tubo de Aço, e pouco mais, para trabalhar Plástico e Metais macios...

https://www.youtube.com/watch?time_continue=18&v=RK4gmRmuQJ8

Homemade mini lathe
Homemade lathe machine

My homemade mini lathe for processing small parts of plastic and soft metals.

https://www.youtube.com/watch?time_continue=18&v=RK4gmRmuQJ8

...E ATÉ UM TORNO CNC!

CNC mini lathe - DIY design and build project from scratch! Part 1

Behrouz Parsee

 Decided my next project is to build an awesome CNC mini lathe, super compact and super accurate is the plan! This video shows my preliminary design and goes through all my thoughts on the engineering behind it.

 

https://www.youtube.com/watch?v=5gTC4Xk_3Cg

Eis este Robot, um Vencedor, deste nosso amigo Lusófono, IgorF2, que venceu uma data de Prémios, por boa razão, é excelente.

E vocês podem fazê-lo em casa, também.

Joy Robot (Robô Da Alegria) - Open Source 3D Printed, Arduino Powered Robot!
IgorF2

First Prize in the Instructables Wheels Contest, Second Prize in the Instructables Arduino Contest, and Runner up in the Design for Kids Challenge. Thanks to everyone who voted on us!!!
Robots are getting everywhere. From industrial applications to underwater and space exploration. But my favorite ones are those used for fun and entertainement! In this project a DIY robot was designed to be used for entertainment in children's hospitals, bringing some fun to the kids. The project is focused in sharing knowledge and promoting technological innovation to assist NGOs that carry out charitable work in children's hospitals.
This instructable shows how to design a remotely operated humanoid robot, controlled over a Wi-Fi network, using an Arduino Uno connected to an ESP8266 Wi-Fi module. It uses some servomotors form head amd arms movements, some DC motors for moving small distances, and a face made of LED matrices. The robot can be controlled from an ordinary internet browser, using a HTML designed interface. An Android smartphone is used to broadcast video and audio from the robot to operator's control interface.

https://www.instructables.com/id/Joy-Robot-Rob%C3%B4-Da-Alegria-Open-Source-3D-Printed-A/

30 dias de teste, montar os vossos Conceitos, como se fosse Lego, com partes já existentes no Mercado!

IronCAD, em vários diferentes programas, permite-vos ser sérios, nos vossos Designs, com a inclusão de peças existentes no Mercado, optimizando, economizando, e convencendo:

IronCAD Mechanical
A Powerful CAD Parts Catalog for Fabricators

Library of Standard Components
IronCAD Mechanical is an IRONCAD catalog that includes pre-made designs for industry-standard fasteners, bearings, O-rings, piping, and flanges, saving fabricators hours of design time. Just drag and drop these readymade designs into assemblies, where they will attach themselves to other parts thanks to IRONCAD’s built-in intelligent behavior.

www.ironcad.com/design-extensions/ironcad-mechanical/

... E para rirem um pouco, eis o que um Engenhocas diz sobre a sua Impressora 3D, quando está cansado, frustrado, e farto de regulações, afinações e mais frustrações:

Adventures in 3D printing

EdgarInventor 

 The sufferings of just another geek trying to bleed a print from a cheapo printer.

 https://www.youtube.com/watch?v=iTlfX8ckugk

 

Grafter! E um Gerador por 30$, Motedis, uma Dobradeira, e ChinaFacture! YEAH!

Já pensaram fazer Maquinetas, ou apenas, Impressões multi-coloridas, mas as peças não encaixam?

Grrr!

Problema resolvido com este Software bacano, que trata de que as coisas funcionem, porque podem  mexer, virtualmente, nos mecanismos, e aferir quais são os que encaixam melhor.

Categoria.

 

Grafter Software Remixes and Improves 3D Printing Models into New Forms
Anne Freier

Grafter can remix 3D printing models into new, functional machines, without the need for extensive tweaking or testing.
Remixing 3D models to create newly printed objects is a common technique in additive manufacturing. A team of experts at the Hasso Plattner Institute in Potsdam, Germany have gone a step further, by developing software to remix 3D printed machines with moving parts.
When remixing, creators often combine parts from parent models with those of a different model. However, this can lead to poorly fitted parts as models often do not match each other.
Grafter, the software developed by Thijs Jan Roumen, Willi Mueller and Patrick Baudisch at the Hasso Plattner Institute addresses these issues.
It does so by fully automating the entire remixing process – from extraction and recombination of the separate 3D printed elements.
However, it also enables the user to see which mechanical elements would fit and work best together.
This saves users the effort in having to re-engineer and tweak or even test the original mechanisms before combining them.

https://all3dp.com/grafter-software-remixes-improves-3d-printing-models-new-forms/

Vento, não falta!

Por isso eis como podem fazer o vosso Gerador Eólico, por cerca de 30 Dólares, e tudo bem explicadinho, num vídeo que não necessita de legendas, por isso, serve para qualquer Geek no mundo:

 

$30 DIY Kilowatt Wind Turbine - Build Tutorial v1.2
OpenSourceLowTech.org

Full construction tutorial text and resources at: http://solarflower.org/tutorial.php?l... Facebook discussion group: https://www.facebook.com/groups/windt... This is the up to date build process for the OpenSourceLowTech.org $30 Lenz2 vertical axis wind turbine. The turbine can be made almost entirely from recycled materials with basic tools in six hours for $20-35. It is tested at 35-40% mechanically efficient, generates 130 watts mechanical in a 30 km/h wind, 1 kilowatt at 60 km/h, and can survive 100 km/h gusts.

https://www.youtube.com/watch?v=t9TrUPoevXI

Motedis!

Isto entusiasma qualquer Geek que se preze: 

Uma loja online com Perfis, peças, e componentes, sim, podem fazer a vossa própria Impressora 3D, mas muito mais...

E a preços MUITO em conta.

Vão lá.

Motedis

A robot bringing you the perfect range of matching construction components: this is Motedis.
No matter how ambitious your project is: from a model railway to industrial structures, you can find anything you need in our online shop. Our broad selection of products includes high quality and versatile aluminium profiles, profile accessories, mechanical components, drive components and 3D printing materials.
Having a robot as a supplier has considerable advantages. We fully automated the purchase process in our online customer interface and cut off unnecessary services to be able to offer you very competitive prices – for big orders as well as for small orders. In this way, industry standard products are available to anyone who is able to deal with a robot of few words. Our customers don’t require product applications assistance as they already know exactly what they need and how to use it to make their ideas come true.
https://www.motedis.com/shop/

Dobrar chapa metálica, como deve de ser, dá-vos a possibiliade de constuír de tudo um pouco...

Por isso, vejam como é com este nosso amigo, que para além disso, vos ensina muitas mais coisas, tem um sem-fim de Links bacanos!

Dobradeira Manual - Faça Você Mesmo (Repostado) Sheet Metal Folding Machine
Oficina Garagem

Tudo bem Família Oficina Garagem?
Nesse vídeo você vai aprender a fazer a sua dobradeira de chapa para dobrar chapa de até 50 centímetros de comprimento.
Aprenda nesse passo a passo bem detalhado que você vai economizar um bom dinheiro, você vai poder dobrar chapas para reparos de funilaria, pequenos trabalhos de serralheria e dobrar diversa chapas usadas em trabalhos hobby.
Se você gostou e ainda não é inscrito não perca tempo e se inscreva que vem muito vídeo bom por ai.

https://www.youtube.com/watch?v=hWmWysOWdMc

Não há nada como um dia, como ver as vossas ideias no Mercado

Mas como?

Eis como, mandem fazer na China, se não conseguirem encontrar quem o queira fazer, na vossa terra. 

Dica duns gandas bacanos, do Movimento Maker Portugal, e estejam à vontade, que lá estão também dois Portugas, o que é uma garantia de Universalidade, damo-nos bem, e entendemo-nos com toda a gente...

 

 

TRANSFORMING YOUR IDEAS INTO REAL PRODUCTS

China Facture's mission is not to be a middle man, or a factory, or a consulting company. We want you to feel China Facture as a member of your team, like one person that is responsible for finding suppliers, manufacturing and getting all the logistics going in China

http://chinafacture.com/#services

48 Programas de Impressão 3D! E Oficina Garagem, uma Ventoínha sem pás, medir cantos, e uma Fresa CNC gigante!

A lista mais exaustiva de Programas de Modelagem e Impressão 3D que eu já vi, 48 Programas diferentes!

E podem seleccionar por  3 categorias, Versão grátis, Sem Instalação, e Bom para principiantes.

É bom.

The Best 3D Modeling and 3D CAD Software Tools For 3D Printing

DO YOU WANT TO LEARN HOW TO CREATE GREAT 3D DESIGNS FOR 3D PRINTING?
We've compiled a curated list of all the different design suites out there. The software suites listed on this page are used extensively in the world of 3D printing. Whether you are just starting out with CAD design, or are an experienced designer looking to take things to the next level, you'll find something to suit your needs on this page. Look out for a star to see the software recommended by MyMiniFactory. If there is software you use that is not on the list, please contact us.

https://www.myminifactory.com/software/

Neste Canal do Youtube, 300% Brasileiro, podem aprender uma data de coisas boas, por isso, vão lá, que o bacano sabe da coisa e sabe explicar bem, trabalho de categoria...

Vou ver se faço uns vídeos assim. 

Este em perticular, trata de como construírem este magnífico, embora simples de fazer, Fogão a lenha regulável: 

 

Fogão a Lenha Portátil / Wood Burning Stove - DIY

Oficina Garagem

Nesse vídeo vou mostrar o passo a passo de como fazer um fogão a lenha portátil com baixo custo de fabricação e ótimo custo beneficio, tanto serve para Camping como também para usar na sua casa.
Gastei nesse fogão cerca de 30 reais de materiais, basta você garimpar os ferros no ferro velho ou sobras em alguma serralheria.
Espero que gostem, deixe aquele like bacana e compartilhe com seus amigos nas redes sociais, um grande abraço e um beijo no coração.

https://www.youtube.com/watch?v=3_UXKX1Y1Fw

Eis com fazerem uma Ventnoínha estilo Dyson, porque está calor cmo sei lá o quê, e assim não levam com o "martelar" tão próprio das Ventoínhas tradicionais...

3D Printed Portable Bladeless Fan
WhyyNot

"A bladeless fan (sometimes called an air multiplier) blows air from a ring with no external blades." Dyson is a very popular company who has utilized this technology to make a quieter fan that performs better than more traditional versions. A common misconception is that "bladeless fans" are not actually bladeless. Instead of being external, a small fan is located in the pedestal and forces air out of a thin ring.
Here I'm building a very basic model which won't perform nearly as well as the Dyson models, but will be a small fraction of the price. This small model is easily portable and can be refreshingly used in a vehicle or outside as well as inside.
Parts printed on a Monoprice Maker Ultimate in PLA with a 0.4mm nozzle on a heated print bed.

https://www.instructables.com/id/3D-Printed-Portable-Bladeless-Fan/

Pode-se agora medir o Raio dos Cantos circulares de algo que queiram reproduzir, ou duplicar, com esta gigajoga impressa em 3D! 

Cortesia da JayconSystems, é perfeita para "reverse Engineering", e conserto, por substítuição, de peças que já não se fabricam mais:

How to Measure a Corner's Radius Using a 3D Printed Tool

JayconSystems

The world is filled with millions of different objects all with different shapes, angles, lengths, heights, widths, surfaces, depths, volumes, geometries, etc… You get the point. There are many different ways of measuring all of these different objects. Here we will focus on measuring rounded corners on physical objects. This can be a difficult task without the right tools.
Our Mechanical Engineering Team at Jaycon Systems creates, reverse engineers, and tests hundreds of hardware projects every year, so in order to make our lives easier, we came up with a simple 3D printed tool to help measure the various radii (believe it or not that is the plural of radius) of the things we work on. We hope we make your life easier as well by making these files available to the public.

https://www.instructables.com/id/How-to-Measure-a-Corners-Radius-Using-a-3D-Printed/

Cá temos uma Fresa CNC, mesmo a puxar pró grandinho, que pode estar mesmo a calhar para alguma Oficina de Garagem, por aí...

Um Sonho realizado, para muitos.

Build Big Cnc at Home 3x2m

VladoM

So why this should be of any interest of yours?
This machine was build without any special tools, basicaly drill, clamps, saw and meter would do. Of course there is more, like drill bits or, taps... but i built this one without having even a proper table.
Machine was designed to use as few part as possible and to be as precise and strong as possible, also speed was desirable as i wanted to use it with plasma, then i also wanted to be able take the machine apart, build it from localy available components so no premade table parts are needed to make the build, and after all this this machine still needed to be nice and square. Weight of some components and force distribution was also thought over.
At the end here are some realy interesting solutions for problems i delt with, worth to check out, at least i believe so.

https://www.instructables.com/id/Build-Big-Cnc-at-Home-3x17m/

Um Arduino feito em casa, um Programa Online para poupar Chapa, mais uma Màquina CNC Arduino, e um Maçarico que se faz em casa.

E se quiezerem um Arduino, e só tiverem 5 Dólares?

Pois FAÇAM um, e com muitas capacidades, e ainda, sem necessidade de um programador externo, que já já está um dentro!

Gduino-No Programmer Required!! for 5$,Programs Multiple AVRs

Gursimran Singh 425 

 Arduino is familiar to anyone who loves to build tech.It is very common in project makers.But why 25$ For this board!! We can make our own!! In this instructable I am going to show you how to build an arduino at home that doesn't need any external programmers like USBASP or serial communicators.USBASP is already embedded inside this circuit!! I was impressed by bjkayani's instructable Beeduino ,the tutorial is well detailed and also Thomas Fischl's USBASP.I decided to make both these circuits on one board.Not by soldering a perfboard or on breadboard but on our very own built PCB!! Yes we can make it at home!! I will show two ways of etching PCBs and also tell which one would be better!! The other interesting thing is that I made it in just 5$ 5 times less than that of original arduino. And also we can program many other programmable ICs like ATtiny45/85 etc.Enjoy!! 

http://www.instructables.com/id/Gduino-No-Programmer-Required-for-5Programs-Multip/

Alinhar os vossos Desenhos Vectoriais para o Corte CNC pode ser um problema, mas este Programa Online, e Open Source, faz esse trabalho por vós, para poupar tempo, e Material:

Antes

Depois

SVG Nest 

What exactly is "nesting"?

We have some (2d) parts to cut and a piece of material, we want to arrange the parts to use as little material as possible. This is a common problem if you use a laser cutter, plasma cutter, CNC machine etc.

In computer terms this is called the irregular bin-packing problem

How much does it cost?

It's free and open source. The code and implementation details are on Github 

http://svgnest.com/

Poderão talvez aproveitar o tal Arduino acima mencionado, para fazerem mais esta máquina CNC, e fica tudo em casa! 

How to Make an Arduino Powered CNC Machine

AbsorberOfLight

Step-by-step instructions on how to build a low cost CNC machine controlled with an Arduino Uno! 

Roller skate wheels will be used to create the X-Axis sled. A combination of 2in and 1in steel tubing will form the base of the machine. 

http://www.instructables.com/id/How-to-Make-an-Arduino-Powered-CNC-Machine/

...Com meia-dúzia de coisas podem fazer este engenhoso Maçarico, que já alcança uma Temperatura respeitável, e vos facilitará muito a vida de Engenhocas: 

How to make a mini Gas-jet (up to 1000ºC)

Roman UrsuHack

Gas-jet (up to 1000ºС) with your own hands!

With the turned on blowing the gas-jet has a good heating power, it can set alight a plumbeous pellet in a few seconds (up to 1000ºС)!

In conclusion I'd like to say: this gas-jet may be improved by installing an ergonomical (pistol) handle and add the piezoelectric element for lighters for the facilitation of firing. 

https://www.youtube.com/watch?v=tuj6_RC9sKo

E aqui está uma Tecnologia mesmo à espera de ser trazida para o Universo dos Fabbers, dobrar Chapa por controle CNC, até ela ter a forma que desejem, para o que quizerem... 

O exemplo é de Chapa de Aço, mas imagino que Folha de Latão ou Alumínio estará ao alcance de máquinas caseiras: 

Ford's Advanced Prototyping, Personalization and Low-Volume Production Technology

Ford Media 

Ford engineers are developing a highly flexible, first-of-its-kind, patented technology to rapidly form sheet metal parts for low-volume production applications. Once fully developed, the technology (Ford Freeform Fabrication Technology, or F3T) will allow for lower costs and ultrafast delivery times for prototypes -- within three business days versus conventional methods that take anywhere from two to six months.

 https://www.youtube.com/watch?v=Wl5_wUVxRvw

Imprimir em 3D, Ferro-Magnético, Gravar em Laser, Impressão em Papel, MAS, em 3D, e Engrenagens Cónicas no Tico-Tico!

Podem agora imprimir nas vossas Impressoras 3D em Material Ferro-Magnético, o que abre toda a espécie de novas possibilidades, como Sensores, relays, e Motores magnéticos, tanto dos rotativos, como dos Lineares!

Functional 3D Printing Looking Attractive with New Magnetic Filament from Graphene 3D Labs

MICHAEL MOLITCH-HOU 

Graphene 3D Lab Inc. has already demonstrated some success with the release of their Conductive Graphene Filament, which at least one of our team members thought was fun to play around with. Now, the Canadian company is introducing yet another functional filament and, this time, it’s sure to attract some attention. Currently for sale on the company’s online store, BlackMagic3D, and on Amazon is Graphene 3D Lab’s all new Ferro-Magnetic PLA filament. 

As must as one might like to create fridge magnets with the material, the new magnetic filament from Graphene 3D Lab can actually be used to make functional objects like sensors, mechanical actuators, and motors.  I won’t pretend to know how to build these, but there are plenty of tutorials online describing how to make magnetic motors, sensors, actuators, and more.  Combined with conductive filament, we are slowly approaching the day in which all the parts necessary to reproduce a 3D printer will be 3D printable, fulfilling the dreams of RepRap founder Adrian Bowyer.

http://3dprintingindustry.com/2016/01/19/65088/

.. Para cpmeçarem a vossa Fabriqueta de Engenhocas, eis uma Máquina CNC só com um Arduino, e capaz de gravar em Madeira, e cortar Papel e Cartão.

Com o dinheiro que fizerem, bem podem comprar depois uma máquina mais potente!

Arduino Laser Engraver Wood Design!

MichielD99 

Hi everybody, my name is Michiel and I am going to show you how to make an awesome looking laser engraver!

A couple of months ago, there was a CNC challenge here at instructables, while checking out the entries of that contest, I saw some pretty cool engraving machines and I thought: "Why shouldn't I make my own?". And so I did, but I didn't want to make someone else's project, I wanted to make my own. And so my story began... :)

This laser engraver uses a 1.8W 445nm laser module, of course, this is nothing compared to the industrial laser cutters who use lasers of (a lot) more than 50W. But this laser will do well for us. It can cut through paper and cardboard and it can engrave all kinds of wood. I haven't tested other materials yet, but I'm sure it can engrave many other materials. l will let you know! It has a large engraving surface of about 500x380mm.

Who can make this laser engraver? Everybody, if you are an engineer, a lawyer, a teacher or a student like me, you can build this thing! All you have to do is follow this instructable. 

http://www.instructables.com/id/Arduino-Laser-Engraver-Wood-Design/

Para Modelos e Maquetes bem realistas, mas numa máquina acessível, esta nova Máquina da Mcor vem-vos ajudar, agora ainda mais, porque vem com uma data de truques novos!

This 3D Printer Builds Full-Color Paper Models!

Tested

Traditional desktop 3D printers use melted plastic as their build material, but Mcor's printers layer sheets of paper on top of each other to create their models. We check out the new Mcor Arke, a printer that cuts from a large spool of paper, glues those sheets together, and then prints color on them to turn digital files into large paper models!

Shot by Adam Isaak and edited by Joey Fameli

https://www.youtube.com/watch?v=2DRJ2oUK4-E#t=23

..E ainda mais uma Impressora 3D por quase nada...

235 Dólares, e feito em 7 horas, não há razão para não tentarem!

How to assemble very cheap 3D printer

Nikus 

3D printing is great tool, you can print almost everything that you need. For example my lamp was broken since few weeks but now I design part that I needed to fix it and it works!

Cheap printer maybe mean for somebody bad printer. But I think that for this price ($235)it works great. It can print offline, has heated bed (without glass table but I will show you how to make it). Assembling it is very easy. I made it without instruction (I didn't check SD card, on it you can find some video tutorials). It took me 7 hours to build, calibrate and print first thing (small 1cmx1cmx1cm cube). 

http://www.instructables.com/id/How-to-Assemble-Very-Cheap-3D-Printer/

..Mais esta, como, com a vossa humilde Serra Tico-tico de Bancada, podem fazer Engrenagens Cónicas, as tais a 90º!

Para quem queira fazer maquinetas em Madeira, isto é indispensável... 

E até vem com os Planos para o Helicóptero que aqui vêem!

É bom! 

Making Bevel Gears on the Scroll SawJEPLANS 
Making wooden Bevel Gears on the Scroll Saw. In this video I go through how to make Bevel gears that go with my wooden helicopter plans.
Available at http://www.jeplans.com
https://www.youtube.com/watch?v=Yu5HjlxDWak&feature=youtu.be

Ano Novo, Impressoras 3D novas! E o Youtube para ligações lentas, mais um Site sobre Ferramentas feitas em casa!!

Ano Novo, Impressoras Novas!

Cá temos a primeira Impressora 3D do ano de 2015, a Me Creator, já totalmente montada, e por 550 Dólares:

Geeetech Me Creator - Ready to Print Fully Assembled 3D Printer
Geeetech Newest Assembled Me Creator Mini Desktop 3D Printer With Sanguinololu Board MK8 Extruder
Me creator is fifth generation 3d printer has been manufactured by Geeetech. Our Me creator is specially launched for innovators and hobbyists to learn 3d printing technology in an easy manner. Although the cost of Me creator is very reasonable than any other 3d printing machines in the market with not sacrificing the quality. First-rate manufacturing and engineering ideologies has been used for designing our creator. It is constructed with steel frame to ensure high stability and durability. Our creator works with major Operating Systems such as Windows, Mac and Linux. No complex setup and installations, connect your printer to PC and enjoy the fun of printing.

https://www.3dprintersonlinestore.com/desktop-me-creator-3d-printer

Eis mais uma Dica do Site LifeHacker:
É uma tortura, com ligações lentas, assistir a Vídeos do Youtube, mas há agora 2 plug-ins um para o Chrome, outro para o Firefox, que vos permitem controlar tudo, assegurando uma melhor experiência:

SmartVideo for YouTube Fixes Buffer Problems on Slow Connections

Thorin Klosowski

Chrome/Firefox: If you're on a slow internet connection, YouTube's unbearable to use. It never seems to know when to start playing and when to stop buffering. SmartVideo for YouTube gives you control over all that.

SmartVideo gives you control over YouTube buffering in all sorts of ways. You can set it up so the buffer has to fully load before the video will play, or leave it on the "smart buffer" that decides when to start playing the video based on your download speed. There are a few other little options built into SmartVideo, but its main appeal is the minute control you get over buffering. If you're stuck on a slow connection, it makes YouTube a lot more bearable

http://lifehacker.com/smartvideo-for-youtube-fixes-buffer-problems-on-slow-co-1676854738

Tem de se gostar deste Site, sobre Ferramentas feitas em casa, e ferramentas, não só Alicates, mas Máquinas-Ferramenta, e tudo o resto! Vai dar, por Categorias, a uma infinidade de outros Sites, o que é muito bom...

E se têem uma Ferramenta vossa, podem lá figurar, também!

About HomemadeTools.net

HomemadeTools.net is an encyclopedia of 16,137 homemade tools.

We hunt homemade tools from all over the internet, and list them here in one place, neatly categorized, and always with full credit to the original builder.

To get your homemade tools added to the encyclopedia, post them in the Homemade Tools subforum on the

http://lifehacker.com/smartvideo-for-youtube-fixes-buffer-problems-on-slow-co-1676854738

Um Vídeo inspirador, Sketchup para Carpinteiros e não só, Google Cardboard, e um Porta-Chaves DIY

Este nosso amigo oferece-nos uma série de Vídeos no Youtube, que são um espectáculo, e nos ensinam a fazer maravilhas com Latas de Bebida! Maravilha! 

Volkswagen hecho con latas de aluminio tutorial cap. 1

como hacer un volkswagen con latas de aluminio tutorial
para descargar las plantillas debes copear cualquier enlase habrir ventana, te enviara a publicidad NO DE VERAS HACERLE CASO SI TE PIDE ALGÚN NUMERO DE TELÉFONO O QUE les DEPOSITES DINERO IGNORALO ,solo debes esperar 5 segundos, y darle doble clic a saltar publicidad, y te enviara directo a la pagina de la descarga.

https://www.youtube.com/watch?v=TfuH8knkePEhttp://www.pinterest.com/pin/131589620332413399/

Se querem fazer as vossas ideias brilhar, e ao mesmo tempo, terem como as mandar fazer, eis uma boa Prenda de Natal, em Livro, ou Vídeo, como fazer estas Obras-de-arte no Sketchup!!
Não esqueçam, se aprenderem a fazer disto, estão habilitados, com umas poucas modificaçĩes, a fazerem as vossas Ilustrações para as vossas próprias  Patentes!

SketchUp Guide for Woodworkers (eBook)

Respected woodworker shows you how to master Google's drawing program 

A must-have for beginning users
SketchUp Guide for Woodworkers is a comprehensive step-by-step manual to help furniture makers master Google's powerful 3-D computer-based drawing program. It's an essential guide for woodworkers who are new to SketchUp or users who want to improve their skills and results.

http://www.tauntonstore.com/sketchup-guide-for-woodworkers-tim-killen-ebook-077846.html

A última aventura da Google é esta série de Slides, vistas com uma versão das velhas View-Master, mas que vocẽs podem fazer em casa!

É bom!

Façam o Download dos Planos e dos Slides, a partir do link embaixo:

Google Cardboard

Experience virtual reality in a simple, fun, and inexpensive way. 

Get it, fold it and look inside to enter the world of Cardboard. It’s a VR experience starting with a simple viewer anyone can build or buy. Once you have it, you can explore a variety of apps that unfold all around you.

https://www.google.com/get/cardboard/

E terminamos por hoje com este Porte-Chaves que qualquer um pode fazer, para um Presente de Natal que é útil e vistoso quanto basta, e elimina o irritante tlim-tlim das ditas chaves:

Personalized Wooden Key Organizer 

DennisPelle

 

This is a key organizer I had made for myself. I was tired of being poked in the legs by my keys everyday and wanted to eliminate the jingle every time I went to open my house door. This project was made with scrap materials I had laying around. (Note: I didn't think to take pics as I was going but I will try to explain the process.)

http://www.instructables.com/id/Wooden-Personalized-Key-Organizer/