Sim, podem fazer pequenos objectos flutuar, devido à Acústica!
Ora aqui está uma frase que se não ouve todos os dias...
Extraordinário!
E este modelo é uma versão improvisada:
Acoustic Levitator Case
Jakub_Nagy
Acoustic levitator from Asier Marzo is a very popular thing here on instructables. I build it, it was working but I noticed couple of issues. For example:
If you look at the second image you can notice that many changes have been made to the original model.
- The 3D printed space between bowls is a bit fragile.
- The levitator can't stand on its own because of its curvature.
- All the electronics are fragile and a bit ugly.
- So I built this case. It does couple of things like:
- Serves as a stand.
- Hides all the electronics.
- Iluminates levitated objects.
- Changes the voltage going into driver which is important when levitating liquids.
- Shows input and output voltage.
https://www.instructables.com/id/Acoustic-Levitator-Case/
Uma maneira rápida de imprimir um Presente original, mesmo, são estes Candeeiros 3D, que mostram uma Foto a preto-e-branco...
Não se arranja disto em outro lado!
Lithophane Lamp : 3D PRINTING YOUR PHOTOS!
geekrex
Every time there's an event of any kind where I need to buy a gift, I always prefer to make something then just buying. But the question always is how can I gift them some unique as well lovable.
Since I have a 3D printer, I always think that the best gift would be something personalized that I would 3D print, something that cannot be bought elsewhere and something that would make me proud to show off my printer's creations! And also, I wouldn't have to keep worrying about finding a good gift idea!
The most personalized item I could 3D print was a lithophane! so I turned it into a Customised Lamp
https://www.instructables.com/id/Lithophane-Lamp-3D-PRINTING-YOUR-PHOTOS/
Este Instructable, diz-me muito, porque comprei uma Delta que é uma bodega!
Partes impressas a 3D, extrusor da tanga, peças de 3ª qualidade...
Vou aproveitar para, aos poucos, a transformar nalguma coisa de jeito:
Cheap 3D Delta Printer Improvements
ehsmaes
This instructable will show you som much needed improvements required to get good results out of a cheap 3D printer of delta type.
I had been curious of 3D printing for a while. I did the usual research and found that what most people recommend for beginners seeking to dip their toes into 3D-printing is carthesian style printers. Thinking that this advice can't possibly apply to me, I obviously decided on a delta. Big mistake! But not on all accounts. I have gained a lot of knowledge in my efforts to get the !#%¤&¤ thing working (at least I like to think so because it makes me feel better). I came to realize that I hadn't purchased a gadget. I purchased a hobby fully capable of sucking up most of my free time.
The printer in question is the Geeetech G2S Pro. This is my first and only 3D printer so I can't really say how it stands up to the competition. I will say though, that my instance of this product was of sub standard quality. The few prints I managed to produce in the beginning were of very poor quality and printing dual-color simply didn't work.
Do you have the same printer and problems or maybe a different delta with similar problems? Don't give up! With some alterations you can actually get really good results! Keep reading.
https://www.instructables.com/id/Cheap-3D-Delta-Printer-Improvements/
Mais algo útil, para calar Familiares e Namoradas que acham que uma Impressora 3D "é um Brinquedo", eis um Porta-chaves que é mesmo BACANO!
5 em 1, não é nada mau!
Keytool - 5 Tools in Your Pocket!
Lucasd136
The Keytool is a 5 keyholder with 5 everyday tools for everyone!
I know, ''another keyholder?'' stick with me, this one is more than meets the eye.
Check out the video above to see the 5 uses of the keytool!
The keytool:
Holds your keys so no more looking for the right one
Holds an USB so you always carry your data with you
Has a small ruler for the quick measurements
Is usable a a docking device for your phone so you can see all your incoming messages or watch your videos!
Has a beer opener because we all need to crack open a cold one with the boys
Is 3D printable in only 1 hour!
https://www.instructables.com/id/Keytool-5-Tools-in-Your-Pocket/
E como é chato como a Potassa, imprimir sempre Objectos monocromáticos, que é o mesmo que dizer, só uma cor, eis como os pintar, mas duma maneira impressionante.
É bom.
Learn How to Paint Your 3D Prints Like a Pro!Learning to paint your 3D printed parts will enable you to create looks-like prototypes, detailed miniatures, and a variety of other visually accurate models. Navigating the various different materials and techniques can be intimidating, and in this post you’ll learn all of the steps needed to paint your parts from start to finish.
Printing
Starting with a detailed and well-printed model will make the rest of the painting process easier and improve your final results. Resin printers like the Formlabs Form 2 are best for painted parts, both because of the high resolution and the ability to use some paints directly on the printed surface.
Sem comentários:
Enviar um comentário