Façam o vosso UAV! E Transmissão de Energia Wireless, 10 truques com tornos, Moldagem de Injecção, e façam os vossos Logotipos

Eis como podem fazer o vosso próprio UAV, para  Pesquisa, ou Fotografia!

Em 8 passos, vão aprender como podem construír a vossa própria máquina voadora: 

Make a UAV for research and photography

McMagical Engineer 

You, yes you, can build and fly a personal UAV. Read this and see how!

If you like this instructable, consider voting for me in the RC contest.

I remember riding in the car when I was little, watching the shadow of our car float over the ground beyond the guard rail. I would imagine that the shadow was from a plane and would think about what it would be like to see the journey from the air. What if I had a little plane that I could fly from the car and explore the areas just behind the trees. What if I could launch a plane on a hike, and see the far peak on the other side of the glacier, or take a video of myself and friends waving from the top of a mountain?

These days, I live near the ocean and wonder what it would be like to capture video of sailboat races, darting in and out of the masts like the seagull scene in "Finding Nemo." What about a video of whales from the air? To see what the seagulls see as they float over the water, under massive bridges and over tiny islands...

Then I found FPV UAVs and the dream became a reality. 

http://www.instructables.com/id/Make-a-UAV-for-research-and-photography/

Para tirarem proveito do wireless, como forma de energia, e ainda por cima, usando Sucata, cá têem este Instructable, que vai dar vida a sei lá quantos mais Protótipos e Engenhocas:

Wireless Electricity Transmission (Simple things required to be collected from scrap)

Gursimran Singh 425

Wireless electricity is something new and exciting. While its core principles are fairly easy to understand it can quickly become overwhelming for the average person. I faced a similar problem, I found the whole thing rather overwhelming to understand due to the fact that there were many different things that I felt I needed to understand to be able to make one. So lets get to it! and here's a video of it working:- 

http://www.instructables.com/id/Wireless-Electricity-Transmission-Simple-things-re/

Segue-se uma série de Truques, para tirarem o máximo proveito dos vossos Tornos de Bancada...

E até a fazerem uma dessas Bancadas!

Cá vai:

Top 10 Vise Hacks!

Yonatan24 

Get the most out of your Bench-Vise!

After building three vises, I think I came up with enough tips, tricks, improvements, unusual uses, and hacks to stop you from getting screwed while DIY'ing (pun not intended!).

In this Instructable I will show:

How to make an improvised Drill-Press with a vise

How to save space- Clamp tools in your vise!

How to save money - Know if you should build or buy

How to make an improvised vise with a C-Clamp

And many, many more!

Let's get started! 

http://www.instructables.com/id/Top-10-Vise-Hacks/

...Para fazerem Peças em Plástico magníficas, sigam o Instructable deste Mestre, que vos mostra como fazerem uma Moldagem por Injecção de Uretano, com Moldes de Silicone, sem falhas:

Urethane Resin Casting a Joby Gorilla Pod Hotshoe Camera Mount - Reaction Injection Molding (RIM) Part:2

botzendesign 

This is Part Two: how to Injection Cast Urethane low volume high quality plastic parts in a Silicone mold. Sometimes also referred to as Reaction Injection Molding (RIM), the process allows you to meet your low volume, injection molded plastic part needs with out aluminum or steel tooling. In my case I just need a few high quality parts, but they need to be as strong or stronger than an injection molded part.

In Part ONE of the Instructables I cover how to make the Silicone Mold that we will be injecting the Urethane resin into to make the plastic parts. Check it out here.

You will need the following for this project.

-Silicone Mold

-Two part resin, I recommend a Quality Urethane from Innovative Polymers I will be using IE-3076

-Digital cooking scale for accurate mixing of the resin

-Protective gloves to keep your body from getting sticky and absorbing harmful materials

-Mixing Cup

-Mixing stick

-Colorant, a pigment of some sort to make your parts a specific color

-Wax paper or Aluminum foil to keep resin off your work surface

-Kitchen Timer so you know how ling you have to work your resin

-An good place to work

-60ml syringe 

http://www.instructables.com/id/Urethane-Resin-Casting-a-Joby-Gorilla-Pod-Hotshoe-/

E para porem um Logotipo à altura destas Dicas, nos vossos Protótipos, Empresas, e Páginas, etc. que tal este Kit, com 60 peças,  para criarem o vosso Logo, totalmente Grátis?

Não quero que vos falte nada... 

Logo Creation Kit 

Friends, today’s free design resource is a logo creation kit containing 60 vector elements in PSD format. Using these elements and mixing them together, you can easily create stunning logos. They are ideal for creating logos, badges and vintage elements. Don’t forget to resize the vectors to your likings.

Refer By:- http://www.graphicsfuel.com/2016/06/logo-creation-kit/ 

www.softarea.in/2016/08/logo-creation-kit.html?spref=fb#

Cagebot, excepcional! E Hologramas com a vossa Impressora Inkjet, um Espelho para o Infinito,

Está cada vez mais fácil montarem os vossos Protótipos, Engenhocas, e quem sabe, máquinas CNC miniatura...

Eis um sistema, compatível com o Lego Mindstroms, já vem com Software próprio, Motores e sensores, e o que é melhor, podem controlar as vossas máquinas por Smartphone ou Tablet! 

 

What is Cagebot?

Modular in every way. 

Cagebot is a modular robotic-kit that allows you to build your vision of the future today.

Dive into the wondrous world of robotics. Cagebot features a variety of modular components. That means you have countless possibilities in your hand. Cagebot components are compatible with other systems like LEGO Mindstorms™, so there are endless possibilities. Motors, sensors and energy sources become the building blocks of your imagination. No matter if you want to build an automated camera rig, RC-Car or an intelligent vacuum cleaner – everything is possible. Just snap the modules together, grab your computer and bring it to life. It’s that simple.

https://cagebot.com/

Sim, é verdade, com as vossas Impressoras de Jacto-de-tinta, essas mesmas, podem criar Hologramas, e a cores, para incorporar onde queiram, graças a este engenhoso Software, agora em Beta, um autêntico achado, deste Site, Petapixel, por isso, sigam-no, e às suas novidades...

Cool New Tech Can Print Full Color Holograms with Regular Inkjet Printers

DL CADE 

Printing a hologram usually involves some sort of special materials or lenses, but a company called Lumii has invented a way to do it with a regular old Epson inkjet printer! The resulting ‘lightfield prints’ look for all the world like 3D, full-color holograms.

Lumii is currently showing off the tech at Siggraph 2016, where the folks at ElectricTV spoke with Co-Founder and CEO Tom Baran and shared a preview of the tech in action.   

http://petapixel.com/2016/07/30/cool-new-tech-can-print-full-color-holograms-regular-inkjet-printers/

Para um espectáculo duma oferta, ou para fazerem uns cobres, cá vai esta ideia, de fazerem este Espelho de reflexões infinitas, ( ou seriam infinitas, se houvessem espelhos perfeitos), mas de qualquer modo, um vistaço:

IKEA Infinity Mirror

dmilesson 

I decided to try building an infinity mirror after seeing this post here on instructables. I had the IKEA frame laying around and decided to try to use that, and it was actually a really god fit for this project.

You'll need:

IKEA Ribba Frame (ribba)

LEDs - I used RGB (WS2812B)

Mirror Film (film)

Mirror

Wire

LED Driver (Arduino or a kit that comes with the RGB LED strips)

5V Adaptor

You could maka a simpler version by just using a single piece of LED strip and wrap that around the sides, but I had these LEDs laying around from another project.

The RIBBA frame is available in black which would save you the painting also. 

http://www.instructables.com/id/IKEA-Infinity-Mirror/

...E para terminar, por hoje, algo de porreiro que podem fazer, para aproveitar alguma da Sucata que vão, inevitávelmente, acumulando na vossa vida de Engenhocas, uma "pistola de raios" Steampunk, ou Dieselpunk, conforme o aspecto:

My Ray Gun From Found Objects

keebie81 

This is my interpretation of a ray gun that I made with some parts found at Delaney's Surplus a few years ago.

You will need something with a handle. I found this Type-2E Metco Metallizing Gun.

Then you need something that matches up well at looks like it could shoot some cosmic rays and kill some bad guys. Vacuum tubes always work great for this part. I am using a 5868 United Electron vacuum tube. It is fairly big. Measures in at about 6" tall and 4.5" diameter.

I also have this old screwdriver thingy that could work as a handle but did not have a smaller vacuum tube at the moment. I will save that for another project. 

http://www.instructables.com/id/My-Ray-Gun-From-Found-Objects/

Inventores, no Caminho para a Índia!

Desta vez, podem descobrir o caminho para a Índia, a promover as vossas Invenções!

Cortesia do Engenheiro Fernando Maldonado Fereira, um infatigável Paladino da Inovação Portuguesa, poder agora inscrever-se para irem expôr as vossas Criações, ao País nosso amigo, que inventou os Sistema Numérico que estamos a usar...

Mas deixêmo-lo falar, ele mesmo, sobre mais este Marco para a Invenção Nacional: 

Envio a brochura do IIIF16, para meteres no "FazVocêMesmo", acompanhada de um convite especial da parte do Exmo. Sr. Presidente dos Inventores Indianos.

Desta forma é apresentada a vontade expressa do Exmo. Dr. Aynampudi Subbarao, de convidar os Inventores Portugueses a participarem no IIIF16, o Salão indiano de Inventores, que decorrerá em meados de Setembro próximo em Bangalore, India.

Pelo mérito que reconheço à página do "FazVocêMesmo", podes afirmar  que está esta tua pagina a dar a noticia em primeira mão de que aos Inventores e Criativos que quiserem participar no Salão Indiano como Membros da INVENTARIUM-SCIENCE, oferecemos a inscrição, o Hotel, alimento, Shuttles, e um espaço stand 3x3, no IIIF16.

Também foi garantido a todos os Inventores Portugueses que participarem, a distinção através de um Diploma e de uma Medalha.

Parece que estamos bem vistos na India.

Talvez seja pela INVENTARIUM lá ter passado em Junho de 2015.

Para tal participação, apenas necessitam de 50 Euros para o Visa, e 600 para o bilhete.

Por 650 Euros aconselho vivamente a participarem os Inventores e Criativos que assim o puderem e viverem a nosso lado, uma experiência inesquecível.

E isto é uma promessa.

Na eventualidade, poderão também os Inventores interessados, enviar-nos um poster de cada um dos seus Inventos, acompanhado da sua descrição e numero de Registo de PI. Serão também apresentados a concurso em representação de Portugal e a integrar em terceira pessoa, a Comitiva Portuguesa que se fará deslocar a Bangalore.

Pelo menos um Diploma de Participação e talvez mais qualquer coisa da nossa parte a cada um dos nossos participantes á distância.

A INVENTARIUM-SCIENCE, acolherá, aconselhará e acompanhará todos os Participantes, pela melhor forma de promover o nosso Engenho e Arte além Fronteiras.

Os interessados em participar, poderão deixar mensagem na página:

https://www.facebook.com/Inventarium-Ciencia-307977142683422/?fref=ts

Serão atempadamente contactados.

Desta forma apresento também os meus sinceros Respeitos ao “FazVoçêMesmo”, uma Página que considero sem duvida de carácter e de utilidade Publica Internacional.

Os nossos Cumprimentos e agradecimentos ao Exmo. Inventor, Sr. Edgar Castelo por diariamente nos revelar o Futuro, todo o Progresso Humano, num ritmo diário, constante e felizmente interminável.

Sonhem alto e não tenham medo dos Vossos Sonhos.

Persigam-nos.

O Sonho comanda a nossa Vida.

Dêem o Vosso melhor, afinal de contas estão a lutar pelo que os motiva.

Vemo-nos na India.

Abraço e um Rico dia a todos!

Fernando Maldonado Lopes

 - INVENTARIUM-SCIENCE - President
- APIICIS – President
- IFIA - EXCO MEMBER
- AEI - EXECUTIVE COMMITTEE MEMBER
- ISRD - CEO
- MEMBER OF GEOGRAPHICAL SOCIETY OF LISBON
-Ambassador of Innovation, Progress and Entrepreneurship

info@inventarium-srd.com

www.inventarium-science.com

Um desenhador CNC em Cartão! E Rute, um Kit didáctico acessível, um Gerador de Gás, um cortador de Plasma, e uma Bicicleta com Pneus de Carro!

Desmontável, configurável, sem usar cola, e porreiramente bacano, eis um Desenhador CNC feito de Cartão, que vai fazer as delícias de muito Engenhoca!
Sabe-se lá, se não haverá outo Instructable, mais abaixo, que não se consiga usar, com este, para um Projecto nunca visto... 

High Precision Cardboard CNC Drawing Machine

Dan Chen

After achieving decent accuracy with the 2-Axis Cardboard CNC machine, it gave me the confidence to make the 3-Axis CNC machine with the cardboard. Here are some of my design considerations when designing this machine.

No Glue

Modular design elements / cut outs

Reconfigurable, you can make the bed/stage larger or smaller

Press fit construction

You can use different materials other than cardboard by changing the press fit slots based on the thickness of the material.

Easy to disassemble and reassemble. Easy to repair

http://www.instructables.com/id/High-Precision-Cardboard-CNC-Drawing-Machine/

Um Kit Didáctico, mas acessível, e com a possibilidade de usar material reciclado, ou seja, a grande ajuda tão conhecida dos Inventores...

A Sucata!

Eis o que estes simpáticos Educadores Brasileiros  nos oferecem, RUTE, uma ideia meritória e que importa divulgar!

Missão 

Nos últimos anos, surgiram vários kits educacionais maravilhosos. Somos fãs de vários deles. Porém, todos eles têm em comum um preço que não é acessível para comunidades carentes para a educação em países em desenvolvimento.

Estes kits custam de U$ 100 a U$ 300. Para uma escola, os valores costumam ser acima de U$ 2.000. Com impostos, taxas e custos de importação esses valores se multiplicam. No Brasil, não é incomum achar brinquedos vendidos em lojas com valores 4 ou 5 vezes o preço original.

Por isso dizemos que RUTE não é um concorrente destes kits. Para quem não pode pagar, nós não somos uma opção mais simples e mais barata, somos a única opção. Outra característica importante é que muitos dos kits atuais não são totalmente open hardware, inviabilizando a cópia sem pagamento de royalties ou licenças. Acreditamos que era necessário fazer algo mais simples, sem técnicas avançadas de produção. Ser rudimentar nos ajuda em 4 pontos:

1 Custo de desenvolvimento mais baixo pois não precisa de molde para injeção de plástico, placas de circuito integrado ou manufatura automatizada

2 Pessoas em regiões afastadas podem produzir seus próprios kits, usando ferramentas e componentes fáceis de achar

3 Possibilidade de usar sucata eletrônica, o que deixar o kit mais barato e a natureza agradece

4 Maior facilidade do entendimento da eletrônica. Para uma criança, uma placa de circuito integrado é muito mais difícil de compreender que um botão soldado em um conector 

MISSION

In the last years, several wonderful educational kits appeared. We’re fans of some of them. But they all have in common a price that isn’t affordable for needy communities’ educational.

These kits costs from US$ 100 – US$ 300. To a school values are usually over US$ 2000. With import and costs and taxes, price grows even further. In Brazilian stores, it isn’t uncommon to find toys marked four or five times its original price.

And that’s why we say that RUTE is not competing with these kits. For those who cannot afford, we’re not a cheaper and simpler option, we are the only option.

Another important feature is that several of the existing kits aren’t fully open hardware, and doesn’t allow replications without the payment of royalties or licenses. We believe that was necessary to do something simpler, that didn’t require advanced manufacturing techniques. Being rudimentary helps us in 4 points:

1 Lower developing costs, because it doesn’t need molds for plastic injection, printed circuit boards or automated manufacturing.

2 People in distant regions can produce their own kits, using tools and components that are easy to find.

3 Possibility of using electronic scrap, which makes the kit even cheaper and nature thanks.

4 Makes understanding electronics easier. To a child, an integrated circuit board is much harder to understand then a button soldered in a connector.

http://rute.io/site/pt/index.php

Algo, hum, não para os de fraco ânimo, um Gerador de Hidrogénio e Oxigénio, portátil e resistente, para fazer Experiências no Quintal, de espantar a Vizinhança!

MUÁHÁHÁHÁ! 

Simple and Durable Hydroxy Gas Generator

Austin Noble 

This instructable is a description of how I made my fifth hydroxy gas generator. Hydroxy gas has been an evolving science for me as I have learned what works, and what doesn't, what you need on a generator, and what you really don't, and that you shouldn't ignite a milk jug full of this stuff at 10:00 PM in the middle of your neighborhood, or you will have some explaining to do. My goal with this generator was to make a device that quickly separates water into hydrogen and oxygen gasses, can be made without advanced tools and is as tough as nails, so that I can throw this thing in my trunk and set it up at a friends house without worrying about spilling caustic fluid, or starting anything on fire. So let's get started.

http://www.instructables.com/id/Simple-and-Durable-Hydroxy-Gas-Generator/

Não se arranja fácilmente um Isqueiro mais Steampunk que este, mas o que é certo, é que este Projecto é definitivamente algo a tentar, e até, quem sabe, a juntar ao Desenhador CNC ali acima, para fazer uma màquina de corte a Plasma CNC, mesmo que só para chapa metálica ultra-fina, papel, algum plástico condutor, e cartão!

Plasma Cutter From an Arc Lighter

NightHawkInLight 

I recently purchased a few cheap arc lighters on ebay with various projects in mind for them. I hadn't thought of a plasma cutter until I had one in my own hands and saw how it could bore a hole through thin materials that get in the way of the arc. There's an issue with trying to cut things with an arc in exposed air as the material will typically burst into flame. In this project I'll show how to integrate the arc lighter with a cutting head that acts as both a shield against air flow as well as a heat sink to prevent the arc from heating materials to their carbonation point beyond the edges of the cut 

http://www.instructables.com/id/Plasma-Cutter-From-an-Arc-Lighter/

Se quizerem aprender a soldar, ou apenas, ter uma Bicicleta para chamar as atenções, e de que maneira, têem este Projecto incrível, e que até pode ser mais cómodo para as articulações, se usarem Jantes em Plástico, e "pneus" em Espuma de Borracha...

Incrível! 

Car Wheel Bicycle - The Learn To Weld Project

Mr-Mash 

This whole thing started off with me finding rusty holes in my car and I figured for the cost of paying someone to fix it I could buy a welder and do it myself, seems logical, right?

I was speaking to a friend about needing to learn how to weld and he said why not build a bike (we originally met while I was working in a bike shop and he came in looking for parts for a chopper he was building) he lent me a couple of books by Atomic Zombie, who you should check out, that dude builds some cool stuff.

His website and forum can be found at www.atomiczombie.com

After toying with the idea for a while it seemed like a good one but I was concerned that it wouldn't come out right so it was decided that I would build something a little silly, so, hence the car wheel bicycle was born. 

http://www.instructables.com/id/Car-Wheel-Bicycle-the-Learn-to-Weld-Project/

Uma Impressora 3D com Tubo em PVC? E Uma Barraca prás Ferramentas, um Compressor de alta capacidade, a Oficina de Electrónica perfeita, e amolar cafas

Encontrei esta lista de 50(!) Projectos para fazer com Tubo de PVC, e não é que a primeira, é um Engenho de furar?

Ora, penso eu, isto irá inspirar algum Engenhocas a fazer uma estrutura para uma Imprssora 3D, ou  uma Fresa CNC...

Mas se  não, está aqui uma lista de engenhocas para fazerem, desde uma cama para o Gato, até a um Drone submersível, passando por um gerador de Iões negativos, para melhorarem a qualidade do Ar...

50 Things to Make with PVC Pipe

xxlauraxx

Here are 50 projects that'll inspire you to pick up some PVC pipe and get making.

You'll find everything from practical creations, like a drill press and baby gate, to more fanciful projects, like a net gun, dunk tank, and paintball mine.

Whether you're new to working with PVC or you use it all the time, trevormates' PVC 101 is worth checking out before starting your next build. 

http://www.instructables.com/id/Things-to-Make-With-PVC-Pipe/

É preciso arrumar todas aquelas Ferramentas, e não há espaço, em casa?
Vai tudo prá Barraca, e aqui seguem as instrucções para construírem uma:

How To Build a Shed

darbinorvar 

A shed is great addition to any property. This small garden shed measures 3 x 6 feet (a little less than 1 x 2 meters) so it's great to build if you don't have a lot of space, plus with some smart organization it can fit a lot of things! 

http://www.instructables.com/id/How-to-Build-a-Shed-1/

E se precisam de Ar Comprimido, e muito dele, mas sem a Barulheira, têem este Instructable, e ainda por cima, fazem-no usamdo um Comptressor reciclado, isto é, sucateado, dum Frigorífico!

D.I.Y Ultra Quiet Shop compressor from a refrigerator motor (compressor)

botzendesign  

I needed to build a very quiet, higher capacity compressor for my Industrial Design Studio shop, since the one I have is quite loud and does not have the capacity that I was comfortable with for my urethane casting work.

In this Instructable I show you how to build a light duty compressor from parts you can buy on Ebay and or your local hardware store, Home Depot, Lowes, Menards, or a scrap yard, using a refrigerator (fridge) motor compressor. This is not for using heavy power tools or spray painting a car. It's for blowing off parts, maybe airbrushing if you add an air/oil dryer to it or just need some air in your shop for various projects. Add your own optional Motörhead badges too. See the Video below for full details. It's a great companion to this Instructable tutorial.

http://www.instructables.com/id/DIY-Ultra-Quiet-Shop-Compressor-From-a-Refrigerato/

...E se, por alguma razão, se vão meter na Electrónica, porque não, terem a Oficina de Electrónica perfeita?

Façam assim: 

Setting Up the Perfect Electronics Workplace

bjkayani 

DIY is in my blood and for about 6 years now i have been doing such work. I have a keen interest in electronics work, prototyping, reusing and building. Working is only fun and calming if you have a good workplace with all you will need at arms length. My workplace is build by myself, improved over the years. I am going to share with you my workplace i use for most of my electronics, robotics and hobby work. I hope you will find some of these ideas inspiring for setting up your workplace.

http://www.instructables.com/id/Setting-Up-the-Perfect-Electronics-Workplace/

Se se envolveram na Cutelaria, ou precisam de afiar ferramentas de corte, ou lá o que seja que envolva amolar metal, este nosso amigo fez a sua própria Ferramenta de Bancada, e moatra-nos como o fazer, também:

Low Budget Knife-maker's Bench Grinder

antagonizer

 

I've been knife-making for quite a few years, and have always relied on a 1"x24" belt grinder, as well as my 4"x36" bench sander to get the job done. For the longest time, I've wanted to invest in a 2" belt grinder, to make the process easier, but could never justify the massive expense that goes into one. That's when I decided to build one for myself.  

http://www.instructables.com/id/Low-Budget-Knife-makers-Bench-Grinder/