Blog Posts

Mostrar mensagens com a etiqueta maker's muse. Mostrar todas as mensagens
Mostrar mensagens com a etiqueta maker's muse. Mostrar todas as mensagens

quarta-feira, 28 de novembro de 2018

Impressão 3D melhor e mais barata! E uma Fresa CNC impecável, um aviso sério, 3 dicas e uma bitola, e calibrar a Imprssora!

Aqui vai uma Dica das boas, deste nosso amigo para tanto imprimirem melhor...
Como mais barato!
Vão a uma Papelaria, e compram folhas auto-colantes deste material para as placas onde se colam Post-its, e são muito mais baratas que o Builtak, e permitem uma impressão com a camada inferior muito mais lisa...
E até vos explica como também comprarem placas de vidro, para essas folhas!
É bom.








Print bed coating you can attach to regular glass beds
Paul Rogalinski

Turns out that dirt cheap black board sticker works great as print bed coating you can attach to regular glass beds. I love the mate finish. Last photo shows a uncoated (to the left) vs. coated (to the right) finish.

PLA adhesion is great and parts do come off without any residue on the build surface after cooling down. Will keep you posted about long term results, a bit worried about expansion of the coating and tearing. Not an issue right now though.












O bacano que fez esta obra-prima de Carpintaria, vai-vos dar uma Fresa CNC, planos grátis, por menos de 900 Dólares!
Vão ao seu Site, também, porque aprender com ele, vale bem a pena.







 
DIY CNC Router for Under $900 - Free Plans Available
DIY Builds

The CNC has a half sheet of plywood cut capacity with a maximum thickness allowance of 6". The entire unit cost under $900 to make. A free set of plans and cost breakdown analysis (with links to every product used) is available for download on my website DIYBuilds.ca














Para os Iluminados que pensam logo em ARMAS DE FOGO, quando se fala em Impressoras 3D, meditem bem nisto:
Se a pressão dos gases, na câmara duma arma de fogo, essa pressão, COMPRIME COBRE...
O que fará a uma pistola feita em Plástico?


If the pressure on a gun's Chamber compresses a copper slug...
What will it do to Plastic Guns?






Mosin-Nagant Factory Pressure Test Rifle
Forgotten Weapons

How did people determine chamber pressure in the years before computers and fancy electronics? Well, by squishing a calibrated slug of copper. Factories would convert rifles specifically for pressure testing use by adding a pressure ring around the chamber, drilling a hole in it, and then threading in a gage to crush a block of copper. This Mosin Nagant is an excellent example of the system, complete with the all the testing apparatus!
















O nosso amigo Angus, da Maker's Muse, brilha, com estas 3 boas Dicas para fazerem Impressões com buracos nelas, mas que não têem depois de acabar com uma broca, e ainda...
Com uma Bitola para verem como vão regular as medicas das vossas Impressões, para fazerem peças que se encaixam na perfeição!
Impecável.








3 Design Tips for Better 3D Printed Holes - CAD For Newbies
Maker's muse

3D Printing isn't a perfect technology, however with clever design we can improve the quality of our parts!
















Mais um tipo impecável, é Chris Thorpe, que me ajudou a ter as Impressoras a imprimir cubos de tamanho mesmo igual, e rodas circulares, mesmo, com esta Instructable que me apontou, para resolver o problema, duma vez por todas!





How to Accurately Calibrate Your 3D Printer
mrakuaku

One of the steepest learning curves when starting with 3D printing is learning how to calibrate all the motors accurately. The good news is that once you know how to calibrate one motor of the printer, the rest are pretty well the same. The following instructable shows you how to accurately calibrate your printer using minimal filament (filament is only needed to calibrate the motor that feeds the filament through the hotend).
I'll be using a Printrbot simple and Repetier for this instructable, but you should be able to follow along with any printer and software combination.














domingo, 8 de julho de 2018

Gumroad! E Ultem, Abelhas, e oportunidades para 3D na vossa Empresa!

Atenção, pessoal, se quizerem vender E-books, e mais coisas, podem contar com este Serviço impecável, o Gumroad, que vos permite ganhar mais uns cobres, ou apenas, partilhar as vossas ideias!
Se fizerem algo, vão vender à Gumroad:



Is Gumroad for Me?

Gumroad is for independent writers, designers, software developers, musicians, artists, teachers, filmmakers, and anyone in-between. Whether you sell digital goods or physical goods, you can use Gumroad. Simply put, if you make stuff for people to buy — Gumroad is for you.
Gumroad enables you to sell directly to your audience — just like you talk to them. If you use the Free version of Gumroad, our fee is just 8.5% + 30 cents per transaction. If you get the Premium version of Gumroad for $10(USD)/month, our fee is 3.5% + 30 cents per sale.


Por exemplo, é lá onde o Genial Angus, da Maker's Muse, vende este livrito bacana, por 20 Dólares, 50 Dicas para a Impressão 3D:



50 3D Printing Tips and Tricks - Maker's Muse eBook
By makersmuse

50+ Tips and Tricks to help you on your 3D Printing endeavors! Here at Maker's Muse we've been 3D Printing for many years, and over that time have picked up many tips which can help save you time, money and sanity when operating 3D Printers.












Isto é importante! 
Um Material de Categoria, este Ultem, coisa que se aprende no Grupo 3DPrinting, este Ultem, que aguenta Temperaturas e pancada como nenhum outro, e ainda por cima, serve para a Medicina, e Podução de Alimentos?
Fenomenal!


Imprima em 3D peças fortes e estáveis
A resistência e estabilidade térmica excepcionais do ULTEM 1010 o tornam ideal para aplicações de prototipagem e ferramentaria avançadas nos setores automotivo, aeroespacial, médico e de produção de alimentos. Suas certificações para contato com alimentos e biocompatibilidade levam a utilização da manufatura aditiva a aplicações como ferramentas de produção de alimentos e dispositivos médicos esterilizáveis em autoclave.

 
3D Printing With ULTEM 1010

Available on Fortus 400mc, 450mc and 900mc 3D Printers, ULTEM 1010 resin offers the highest heat resistance, chemical resistance and tensile strength of any FDM thermoplastic. The certified grade of this material is biocompatible and approved for food contact with NSF 51 and ISO 10993/USP Class VI certifications.
Produce large custom tools for metal, plastic or composite parts fabrication; 3D print medical tools like surgical guides that can withstand steam autoclaving; build temperature-resistant dies, patterns and fixtures for food production; even manufacture out-of-cabin aerospace components and under-the-hood automotive components including housings, ducts and semi-structural components.

http://www.stratasys.com/br/materiais/fdm/ultem-1010 


MAS VIRÁ TAMBÉM EM FILAMENTO, para as vossas Impressoras 3D?
SIM!


Ultem™ 9085 3D Filament
ltem™ 9085 PEI (Polyether Imide) is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance. Ultem™ 9085 resin offers the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 186°C.
Product attributes include:
  •  High thermal properties; (Tg) of 186°C
  •  Inherent flame resistance with low smoke evolution and low smoke toxicity
  •  Long-term hydrolytic stability
  •  Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
  •  Exceptional strength and modulus, even at elevated temperatures
  •  Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
  •  Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies
 https://www.3dxtech.com/ultem-9085-3d-printing-filament/










Mais este Grupo porreiro, desta vez de Domótica, dica de Mart Hale, Domoticz EspEasy ESP8266 Raspberry Pi, onde se domina a Nobre Arte da domótica, e até se diz onde se vendem
Monitores para saberem o estado de saúde das vossas Colmeias!

 


BuzzBox: Listen to Your Bees

The BuzzBox is your smart hive monitoring assistant. We use artificial intelligence to inspect your hive's health and report updates to your mobile app continually throughout the day. Detect swarming, missing queen, healthy, sick, or collapsed hives in real-time. Monitor temperature, humidity, barometric pressure, and local weather conditions. It even contains anti-theft systems that alert you when your hive is disturbed.


https://www.osbeehives.com/products/buzzbox-listen-to-your-bees

Encontram lá, na Domoticz EspEasy ESP8266 Raspberry Pi, toda a espécie de apoio, sobre o tal Domoticz, Arduino, e etc.

Introduction to Domoticz for Home Automation
Fabulous Home Automation

This is a quick introduction to Domoticz which is the basis for our whole-home automation system including audio, climate, security, electrical devices and more. Further videos will show in much more detail how the Domoticz platform can be used to control other home control devices and systems via radio and via network commands.













A Impressão 3D pode ser uma ajuda, ou só um Hobby...

Onde a Impressão 3D pode-vos ajudar a vida, mesmo, e onde é meos útil que isso, podem descobrir 10 maneiras de o saberem:





Our 10 best tips to identify 3D printing opportunities for your business
Amandine Richardot

Additive manufacturing can be a great asset for your business. It can truly help your company in becoming a true market leader. But, just like any great tool, it needs to be used in the right way. Indeed, using 3D printing is surely an asset, but not in all cases. Deploying a well-planned additive manufacturing strategy can help you reduce costs, build better products, and optimize your whole production process. You can use this technology for prototyping, of course, but also for production. But how can you know when it’s relevant or not to use 3D printing? Since Sculpteo was created, we got to observe numerous usages of additive manufacturing, and here are the best tips we can give you on how to identify 3D printing opportunities for your business.

sábado, 5 de agosto de 2017

Uma Hoverboard! E Geometria 3D, Maker's Muse, um Analizador Wi-Fi, e um Microscópio de 1 Dólar!

Fácil de fazer, divertidíssimo, eis um Skateboard com base Hovercraft!
Uma bela ideia para fazer, neste Verão:





Hoverboard
mr_fid

Prototype Hoverboard for children.
This is a fairly quick build of a prototype hoverboard. It’s basically a hovercraft with the forward propulsion provided by your foot like a skateboard, it uses two 65mm Electric Ducted Fans (EDF’s) to provide the lift, these are each driven by a 30 Amp ESC and the battery supply if via two 3 cell Lipo’s.
























Na eterna busca de coisas para imprimir em 3D, eis uma achega, que tal, este programa, Structure Synth, que engendra uns sólidos 3D fascinantes?









3D Printing impossible geometries with Structure Synth

Maker's Muse
How I used Structure Synth to 3D Print incredibly detailed code driven patterns on my Prusa i3 Mk2 3D Printer - It's tonnes of fun!
https://www.youtube.com/watch?v=1VHV--A9xCc













Essa Dica ali acima, veio deste Canal Youtube muito interessante para tudo a ver com Impressão 3D, Maker's Muse, vão ver que está cheio de material impecável:







What is Maker's Muse?

Maker's Muse is a Technology based YouTube channel with a focus on 3D Printing technology. It focuses on creating content involving the three core values of Maker's muse; Create, Innovate and Educate.















Isto de "zonas Wi-Fi", às vezes, é só conversa...
Para saberem as condições de recepção Wi-Fi, eis um Projecto bacano, esta Analizador de Sinal de Bolso!






Portable WiFi Analyzer
陳亮

This instructables shows how to use a Tic Tac sweet box make a portable WiFi Analyzer.

http://www.instructables.com/id/Portable-WiFi-Analyzer/














E termino por hoje com este meritório e simples projecto, como fazer das vossas Câmaras, Microscópios, gastando 1 Dólar, mais ou menos.
Ciência para todos.




The $1 Pocket Microscope - Explore the World Around You at 80x and 140x!
anisotropy

Microscopes let you explore the world around you at a small scale. With this $1 3D printed microscope, you can see tiny things in amazing detail! Looking at insects, plants, and even dirt close up can be fascinating.
I've already seen firsthand how impactful inexpensive tools for scientific exploration can be. I started this design about two months ago when I wanted a cheap microscope to bring with me to Liberia, where I participated in a program training science teachers. Some of the teachers, particularly those from rural areas, had never used a microscope before. Using this very Pocket Microscope was the first time they saw the microscopic world firsthand!

http://www.instructables.com/id/The-1-Pocket-Microscope-Explore-the-World-Around-Y/